Abstract:Capacitive deionization (CDI) is an emerging technology that supplies deionized water to resolve the fresh water shortage. CDI electrodes are mainly made up of carbon materials, of which the deionization performance is closely related to their physical properties and structures. Hence, a rational design of electrode material structure is essentially significant. Functionalized graphene (fG) in particular has recently been regarded as characteristic CDI electrode material. However, preparation of fG based on graphene oxide usually results in serious secondary pollution due to usage of highly poisonous chemicals, and thus still cannot meet the demand of practical application. It is feasible that environmentally-friendly activated carbon (AC) and small amounts of fGs can be combined rationally, and used as CDI electrodes. Here, sono-assembled AC/m-phenylenediamine (mPEA) or p-phenylenediaminefG inter-connected network architecture has been constructed for the first time successfully. The specific capacitances of the AC/fG composites were found to be significantly higher than that of the AC electrode owing to mesoporous generation. Also, among all the samples, the AC composite with 5 wt % mPEA-fG exhibited an ultrahigh electrosorption capacity of 12.58 mg/g (or 0.22 mmol/g) in NaCl solution. These observations indicate that fG can serve as an efficient conductive bridge to decrease the aggregation of AC particles, and improve the electron transfer with the composite electrode. This work provides an effective strategy for the environmental and economical electrode architectures for general applications in CDI and energy storage. (C) 2016 Elsevier Ltd. All rights reserved.

Carbon aerogel electrode for excellent dephosphorization via flow capacitive deionization

Enhanced Charge Efficiency and Electrode Separation Utilizing Magnetic Carbon in Flow Electrode Capacitive Deionization

Selection and optimization of carbon-based electrode materials for flow-electrode capacitive deionization

Efficient phosphorus removal from ultra-low concentration wastewater by flow-electrode capacitive deionization

Carbonaceous C@FeS Flow Electrode for Electrochemcal Capacitive Deionization Application

Acid-free treatment of fiber-structured biocarbon material enhances flow capacitive deionization performance

A newly designed graphite-polyaniline composite current collector to enhance the performance of flow electrode capacitive deionization

Integrating FeOOH with bacterial cellulose-derived 3D carbon nanofiber aerogels for fast and stable capacitive deionization based on accelerating chloride insertion

Enhanced phosphorus electrosorption using Fe, N-co-doped porous electrode via capacitive deionization

Capacitance control of carbon aerogel electrodes

Metal-organic framework derived carbon nanoarchitectures for highly efficient flow-electrode CDI desalination

Three-dimensional electrode design with conductive fibers and ordered macropores for enhanced capacitive deionization performance

Nanoarchitectonics of heteroatom-doped hierarchical porous carbon derived from carboxymethyl cellulose carbon aerogel and metal-organic framework for capacitive deionization

Vacancy engineering of FeP dispersed N, P-doped porous carbon for high-performance capacitive deionization

Small particle size activated carbon enhanced flow electrode capacitive deionization desalination performances by reducing the interfacial concentration difference

Effective electrosorption and recovery of phosphorus by capacitive deionization with a covalent organic framework-membrane coating electrode

Mesoporous Generation-Inspired Ultrahigh Capacitive Deionization Performance by Sono-Assembled Activated Carbon/Inter-Connected Graphene Network Architecture

Enhanced Salt Removal Performance Using Graphene-Modified Sodium Vanadium Fluorophosphate in Flow Electrode Capacitive Deionization

Enhanced Ammonium Removal and Recovery from Wastewater Using an Innovative Redox-Active Flow Electrode: the Significant Role of Redox Charge Compensation and Hydrogen Bond Network Reconstruction

The optimized flow-electrode capacitive deionization (FCDI) performance by ZIF-8 derived nanoporous carbon polyhedron

From MOF to Al/N-doped porous carbon: Creating multiple capture sites for efficient capacitive deionization defluorination