Bouthaina Sayad,Mansour Rifaat Helmi,Oumr Adnan Osra,Ahmad Mohammed Abed,Haytham Hussain Alhubashi
Abstract:Cities are facing significant challenges related to climate change, particularly due to the increasing impact of the Urban Heat Island (UHI) phenomenon. The present study investigated the UHI phenomenon at the microscale in Annaba, Algeria. The research involved a multi-step approach, starting with on-site measurements of urban microclimate parameters, performed in downtown Annaba on 6 July 2023. The UHI intensity was quantified by comparing city-measured temperatures with rural surroundings. Thermal imaging is then used to empirically identify the contributing factors to UHI initiation at the microscale. The study employed the ENVI-met model to analyse mitigation strategies, manipulating parameters for six scenarios including the current design of the study area. Outputs were used to assess the impact of these strategies on air temperature, mean radiant temperature, relative humidity, and wind speed. The findings revealed an intense UHI effect in Annaba city with a peak difference of 6.9 °C, with practical implications for buildings, ground and roads, vehicles, air conditioners, and specific facade materials. Introducing urban vegetation, particularly urban trees and green roofs, proved highly effectiveness in mitigating the UHI in downtown Annaba. Urban trees demonstrated the most substantial impact, reducing temperatures by 1.9 °C at 1 p.m., while green roof temperature reductions ranged from 0.1 °C to 2 °C.
environmental sciences,environmental studies,green & sustainable science & technology
What problem does this paper attempt to address?
The problem that this paper attempts to solve is the impact of the Urban Heat Island (UHI) phenomenon at the micro - scale in Annaba City, Algeria, and its mitigation strategies. Specifically, the research aims to:
1. **Measure the intensity of the urban heat island**: Quantify the intensity of the urban heat island effect in Annaba City by conducting on - site measurements of urban micro - climate parameters and comparing them with the temperatures in the surrounding rural areas.
2. **Identify the causes of the urban heat island**: Empirically analyze the factors contributing to the urban heat island phenomenon, especially those at the micro - scale, using thermal imaging technology.
3. **Evaluate the effectiveness of mitigation strategies**: Use the ENVI - met micro - climate model to simulate and analyze the impacts of different mitigation strategies on air temperature, mean radiant temperature, relative humidity, and wind speed, in order to determine the most effective mitigation measures.
### Research Background
The urban heat island phenomenon refers to a phenomenon where the temperature in urban areas is significantly higher than that in the surrounding rural areas. This phenomenon is the result of multiple factors working together, including changes in the urban surface (such as the widespread use of concrete and asphalt), the reduction of natural vegetation, and the increase in heat generated by human activities. The urban heat island not only affects the quality of life of residents but also increases energy consumption, aggravates air pollution, and raises heat - related health risks.
### Research Methods
1. **On - site measurement**:
- Detailed micro - climate parameter measurements, including air temperature (\(T_a\)), relative humidity (RH), and wind speed (Ws), were carried out at two locations (P1 and P2) in the center of Annaba City.
- The measurement time was from 8 am to 8 pm on July 6, 2023, and data were recorded every half - hour.
- High - precision equipment was used for measurement to ensure the accuracy of the data.
2. **Thermal imaging**:
- A thermal imager (testo 871) was used to take thermal images between 10 am and 6 pm to visually show the heat distribution and propagation in the urban environment.
3. **ENVI - met model simulation**:
- Six different mitigation strategy scenarios were simulated through the ENVI - met micro - climate model, including the current design, changes in surface road materials, the introduction of urban trees, green facades, green roofs, and the installation of water bodies.
- The simulation results were used to evaluate the impacts of different strategies on micro - climate conditions, especially on air temperature, mean radiant temperature, relative humidity, and wind speed.
### Main Findings
- **Urban heat island intensity**: The urban heat island effect in Annaba City is very significant, with a maximum temperature difference reaching 6.9°C.
- **Main causes**: Buildings, ground and roads, vehicles, air conditioners, and specific exterior wall materials are all important factors contributing to the urban heat island.
- **Effectiveness of mitigation strategies**:
- The introduction of urban vegetation, especially urban trees and green roofs, has been proven to be an effective measure to mitigate the urban heat island.
- The cooling effect of urban trees is the most significant, being able to reduce the temperature by 1.9°C at 1 pm.
- The temperature reduction range of green roofs is between 0.1°C and 2°C.
### Conclusion
This research provides important scientific basis for urban planning and sustainable development in Annaba City, emphasizing the important role of urban greening in mitigating the urban heat island effect. By implementing these mitigation strategies, the micro - climate of the city can be effectively improved, and the quality of life of residents and the overall resilience of the city can be enhanced.