Abstract:The cigarette filter is an essential component of modern cigarettes and studying the flow distribution within the cigarette filter is of great significance in reducing the harm of cigarettes and optimizing smoking sensations. As the object of numerical simulation research, a three-dimensional model of the cigarette was accurately constructed through micro-CT reverse engineering, achieving a scanning accuracy of 4.05 μm. An overall porous media model of the cigarette filter was established to characterize the pressure distribution inside the filter. Based on the three-dimensional reconstruction, a local simulation model of the cavity-filtered filter was created by extracting a 1/36 geometric model. The simulation results of the overall porous media model of the cigarette filter were used as the pressure boundary conditions for the local simulation model of the cavity-filtered filter, and the effects of the wrapped paper and cavity on the flow field were analyzed. The results show that the simulated pressure drop in the overall porous media model of the cigarette filter had a deviation of less than 3.5% compared to the experimental results. This suggests that the porous media model can effectively predict the changes in pressure drop within the filter. When both wrapped paper and cavity were present, the velocity at the interface between acetate fiber and wrapped paper increased by 141.54%, while the pressure approached 0 Pa. Similarly, at the interface between acetate fiber and cavity, the velocity increased by 130.77%. It indicates that both wrapped paper and cavity significantly influenced the flow field characteristics within the cigarette filter. Additionally, as the porosity of the wrapped paper gradually increased from 0.69 to 0.99 in the radial direction, the fluid velocity increased by 14.46%, while the fluid pressure decreased by 29.09%. These changes were particularly evident when the porosity was below 0.87.

Prediction Model of Smoke Components with Cigarette Materials

An Accurate Model for Predicting Retention Time of Coffee Flavor in Cigarette

Investigation into the Effect of Cigarette Design on Emission of 7 Harmful Chemicals in Mainstream Smoke

Construction of a numerical model for cigarette smoking and combustion and simulation of combustion cone shape

Research on Cigarette During Smoking Based on Reverse Engineering and Numerical Simulation

Research Progress in Cigarette Combustion Model

Study on Model of Near-infrared Spectroscopy and Chemical Components of Cigarette

Gas Flow and Filter Ventilation of an Unlit Cigarette: Model Building, Numerical Solution and Experimental Validation

The Effects of Cigarette Materials Combination on the Mainstteam Smoke Delivery and Filtration Efficiency

Regression prediction of tobacco chemical components during curing based on color quantification and machine learning

A Research on Mathematical Model and Prediction Method for Raw Tobacco Material Quality Based on Cluster Classification

Correlation analysis of chemical component and smoke component in flue-cured tobacco based on integrating methods

Novel Method for Investigating the Correlation of Sensory Contribution and Cigarette Mainstream Smoke

Prediction of Cigarette Tar Delivery with Support Vector Machine

Chemistry of Cigarette Burning Processes

An Approach for Predicting the Toxicity of Smoke

Model Smoke Stream Adsorption over Cellulose Acetate Stick with Three-dimensional Temperature Gradient by Combining In-Situ DRIFTS with Infrared Thermal Imaging

Effects of Cigarette Materials on Mainstream Smoke Delivery and Filtration Efficiency of Cigarette with 27 Mm Filter Rod

Influence of Ventilation on Burning Temperature and Deliveries of Harmful Components in Mainstream Cigarette Smoke

Flow field analysis of cigarette filter through micro-CT-based geometries and CFD simulation

Numerical Simulation of the Burning Process in a King-Size Cigarette Based on Experimentally Derived Reaction Kinetics