Abstract:Energy and mass transfer in photocatalytic systems plays a significant role in photocatalytic water splitting, but relevant research has long been ignored. Here, an interfacial photocatalytic mode for photocatalytic hydrogen production is exploited to optimize the energy and mass flows and mainly includes a heat-insulating layer, a water-channel layer, and a photothermal photocatalytic layer. In this mode, the energy flow is optimized for efficient spreading, conversion, and utilization. A low-loss path (ultrathin water film) and an efficient heat localized zone are constructed, where light energy, especially infrared-light energy, can transfer to the target functional membrane surface with low loss and the thermal energy converted from light can be localized for further use. Meanwhile, the optimization of the mass flow is achieved by improving the desorption capacity of the products. The generated hydrogen bubbles can rapidly leave from the surface of the photocatalyst, along with the active sites being released timely. Consequently, the photocatalytic hydrogen production rate can be increased up to about 6.6 times that in a conventional photocatalytic mode. From the system design aspect, this work provides an efficient strategy to improve the performance of photocatalytic water splitting by optimizing the energy and mass flows.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c01108?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c01108</a>.Theoretical calculation and analysis, photos, EDS spectrum, transmission spectrum, other curves of hydrogen evolution, SEM images, XRD patterns, absorption spectra, and curves of temperature changes (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_001.pdf">PDF</a>)Video S1. Bubbles growing on the membrane sample submerged in water 10 mm below the surface (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_002.mp4">MP4</a>)Video S2. Bubbles growing on the membrane sample submerged in water 5 mm below the surface (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_003.mp4">MP4</a>)Video S3. Bubbles growing on the membrane sample submerged in water 2 mm below the surface (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_004.mp4">MP4</a>)Video S4. Bubbles growing on the membrane sample but taking only little pressure from water (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_005.mp4">MP4</a>)Video S5. Hydrogen bubbles sticking on the photocatalytic membrane when the photocatalytic reaction is being carried out (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c01108/suppl_file/am1c01108_si_006.mp4">MP4</a>)This article has not yet been cited by other publications.

Solar Thermochemical Water-Splitting Reaction Enhanced by Hydrogen Permeation Membrane

Effect of Hydrogen Permeation and Operating Parameters on Thermochemical Performance of Solar-Driven Steam Methane Reforming Membrane Reactor

Solar-to-hydrogen efficiency of more than 9% in photocatalytic water splitting

Unlocking Ultra‐High Performance in Immersed Solar Water Splitting with Optimised Energetics

0.68% of solar-to-hydrogen efficiency and high photostability of organic-inorganic membrane catalyst

Hydrogen Production and Solar Energy Storage with Thermo-Electrochemically Enhanced Steam Methane Reforming

Integrating Perovskite Photovoltaics and Noble-Metal-Free Catalysts Toward Efficient Solar Energy Conversion and H2s Splitting

Full-spectrum solar water decomposition for hydrogen production via a concentrating photovoltaic-thermal power generator-solid oxide electrolysis cell system

Kinetic and thermodynamic analyses of mid/low-temperature ammonia decomposition in solar-driven hydrogen permeation membrane reactor

Process Accumulated 8% Efficient Cu2 ZnSnS4 -BiVO4 Tandem Cell for Solar Hydrogen Evolution with the Dynamic Balance of Solar Energy Storage and Conversion

Boosting photothermal-assisted photocatalytic water/seawater splitting into hydrogen based on greenhouse-induced photothermal effect

Scalable Water Splitting on Particulate Photocatalyst Sheets with A Solar-To-Hydrogen Energy Conversion Efficiency Exceeding 1%

Non‐Lignin Substrate Constructing the Gas‐Solid Interface For Enhancing The Photothermal Catalytic Water Vapor Splitting

Hydrogen from Sunlight and Water: A Side-by-Side Comparison between Photoelectrochemical and Solar Thermochemical Water-Splitting

A high temperature tubular reactor with hybrid concentrated solar and electric heat supply for steam methane reforming

Photothermally Driven Decoupling of Gas Evolution at the Solid-Liquid Interface for Boosted Photocatalytic Hydrogen Production.

Interfacial Assembled Hydrogel Evaporator for Highly Efficient Thermal Management and Photothermal Coupled Water Splitting Reaction

Photothermal catalytic hydrogen production coupled with thermoelectric waste heat utilization and thermal energy storage for continuous power generation

Solar‐Thermally Driven Effective Molybdenum Disulfide Electrochemical Hydrogen Evolution Reactions Using Photothermal Generators

Efficient Solar-Driven Water Splitting Enabled by Perovskite Photovoltaics and a Halogen-Modulated Metal-Organic Framework Electrocatalyst

Interfacial Design to Enhance Photocatalytic Hydrogen Evolution via Optimizing Energy and Mass Flows