Abstract:Nanocrystalline Ti1- x Crx O2 (0 ≤ x ≤ 0.20) samples were synthesised via acid-modified sol-gel process and characterised with various techniques, such as HRTEM, FESEM, Raman, XPS, DTA and VSM. The TEM image of TiO2 exhibits elongated nanoparticles with an average size of 10 nm. The HRTEM in combination with selected area electron diffraction (SAED) reveals the interplanar spacing and polycrystalline nature of the samples, respectively. FESEM micrographs divulge nonuniform morphologies and less aggregation of the particles in the doped sample. Raman spectra ensure the phase purity of the samples and a blue shift on Cr doping. X-ray photoelectron spectra (XPS) predict the chemical state of the elements and oxygen vacancies in the prepared samples. Room temperature magnetic measurements exhibit a significant variation in the magnetic parameters on Cr doping in TiO2 . The differential thermal analysis (DTA) shows the structural phase transition at ∼630°C. The photocatalytic performance is studied for the degradation of methylene blue (MB) dye under visible light irradiation. A higher photocatalytic efficiency is found for the 20% of Cr-doped TiO2 . These studies propose that the appropriate incorporation of Cr ions makes TiO2 very efficient for visible light-driven photocatalysts required for applications in wastewater treatment. LAY DESCRIPTION: In the present study, nanoparticles of TiO2 and Cr-doped TiO2 have been synthesised by a cost-effective acid-modified sol-gel process. The effect of Cr doping on the microstructure, thermal, magnetic and photocatalytic properties of TiO2 were explored in detail. The transmission electron microscopy (TEM) images exhibit the presence of elongated nanoparticles with an average size of 10 nm. Field emission scanning electron microscopy (FESEM) was used to study the surface morphology of the synthesised materials, which revealed nonuniform morphologies and less aggregation of the particles in the Cr-doped sample. Energy dispersive x-ray spectroscopy (EDS) confirms the elemental compositions with the appropriate stoichiometry of the elements. Raman spectra ensure the phase purity of the materials and also a blue shift with the incorporation of Cr ions in TiO2 . X-ray photoelectron spectra (XPS) predict the chemical state of the elements and oxygen vacancies in the prepared samples. The magnetic nature of all the synthesised samples was examined through the vibrating sample magnetometer (VSM) and revealed weak ferromagnetic behaviour of the samples. These results signify that the oxygen vacancies and defects play a crucial role in developing the ferromagnetic nature of oxide semiconductors. The differential thermal analysis (DTA) shows the structural phase transition at ∼630°C. The photocatalytic performance of the prepared samples was studied for the degradation of methylene blue (MB) dye under irradiation of visible light. A higher photocatalytic efficiency was found for the 20% of Cr-doped TiO2 . These studies propose that the appropriate incorporation of Cr ions makes TiO2 very efficient for visible light-driven photocatalysts required for applications in wastewater treatment.

Enhanced Photocatalytic Activity of Metal‐Metal‐Nonmetal Multidoped TiO2 Nanoparticles towards Visible Light

Facile Fabrication of N-doped TiO2 Nanocatalyst with Superior Performance under Visible Light Irradiation

Highly-enhanced Performance of TiO 2 Nanotubes Attached with CdS quantum Dots

In-Situ Generation of Nano TiO2 from MIL-125(Ti) and Its Role in Boosting the Photocatalytic Degradation of Tetracycline Hydrochloride

Fabrication of V-Doped TiO2 Nanoparticles and Photocatalytic Studies under Visible Light

Enhanced Optical Absorption and Photocatalytic Activity of Cu/N-Codoped Tio2 Nanocrystals

Effect of metal and non-metal doping on photocatalytic performance of titanium dioxide (TiO2): A Review

Photocatalytic CO2 reduction using metal and nonmetal doped TiO2 and its mechanism

(Mo+n) Codoped TiO2 for Enhanced Visible-Light Photoactivity

Non-metal modified TiO2: a step towards visible light photocatalysis

Recent progress in metal-doped TiO2, non-metal doped/codoped TiO2 and TiO2 nanostructured hybrids for enhanced photocatalysis

Adsorption and solar light activity of transition-metal doped TiO2 nanoparticles as semiconductor photocatalyst

Highly effective Fe-doped TiO2 nanoparticles for removal of toxic organic dyes under visible light illumination

The Direct Synthesis of Mesoporous Structured MnO(2)/TiO(2) Nanocomposite: a Novel Visible-Light Active Photocatalyst with Large Pore Size.

Enhanced Visible Light Responsive Photocatalytic Activity of TiO2-based Nanocrystallites: Impact of Doping Sequence

Improvement of Photocatalytic Degradation of Titanium Dioxide Nanomaterials by Non-metal Doping

Physical properties and photocatalytic activity of Cr-doped TiO2 nanoparticles

Synthesis, optical properties, and enhanced photocatalytic degradation of (Mg, Cu) co-doped TiO2 nanoparticles under ultraviolet light irradiation

Hydrothermally Synthesized TiO2-Doped MnO2 Nanocomposites for Electrochemical and Photocatalytic Activity

Visible-Light-Active N-Doped TiO2 Photocatalysts: Synthesis from TiOSO4, Characterization, and Enhancement of Stability Via Surface Modification

Modification of Novel Nano-TiO2 Photocatalytic Material