Abstract:Separation of water-in-heavy oil (W/HO) emulsions is a critical issue in petroleum industry (especially for the thickened oils and natural bitumen) due to its high viscosity and rigid interfacial film formed by natural stabilizers (e.g., asphaltenes). Herein, two different strategies have been proposed to enhance the demulsification of the W/HO emulsions from the aspects of interfacial reconstruction and bulk oil phase property regulation. Firstly, to break the rigid interfacial film at the oil–water interface, a novel demulsifier (TJU-3, M n : 6131 g/mol) has been successfully designed, introducing high content of carboxyl groups and ester groups to the molecules. The chemical groups, molecular structure, content of oxygen-containing groups, solubility, turbidity and phase distribution rules of TJU-3 have been instrumentally determined. It was observed that TJU-3 performed well in breaking the W/HO emulsions with faster rate (reaching 100% dehydration in less 25 min) and no "tailing phenomenon" compared with other commercial demulsifiers. Secondly, to facilitate the diffusion of demulsifer molecules from bulk oil phase to oil–water interface which promote the demulsification rate, the effect of oil viscosity on the demulsification efficiency has been investigated. Results showed that, after working with demulsifiers, when only one single method (heating or dilution at ambient conditions) was used, the dehydration rate of W/HO emulsions is limited (no more than 50%). When combining demulsifiers with diluents at slight heating conditions, a complete dehydration (∼100%) of W/HO emulsions was obtained, which was optimized at 60 °C, 400 ppm. This synergistic effect was mainly contributed to the fact that viscosity reduction weakens the obstruction of the demulsifier diffusion and increases the average kinetic energy of the thermal movement of demulsifiers. This work would provide insights for developing new low-carbon demulsification separation method for petroleum production.

Unleashing the power of hydrous 2-methyl tetrahydrofuran for enhanced oil extraction from rice bran and soybean flakes

Study on rice bran oil extraction by cold pressed extraction method and solvent extraction method

Co-hydrotreating of Used Engine Oil and the Low-Boiling Fraction of Bio-Oil Blends for the Production of Liquid Fuel

Research and performance evaluation of CO2 solubilization synergist for heavy oil

Extraction Optimization, Antidiabetic and Antiglycation Potentials of Aqueous Glycerol Extract from Rice (oryza Sativa L.) Bran

Conventional and ultrasound-assisted extraction of rice bran oil with isopropanol as solvent

Effects of different alcoholic extraction conditions on soybean oil yield, fatty acid composition and protein solubility of defatted meal

Rice bran oil extraction by ethanol: optimization of γ-oryzanol and polyphenol

Optimization of Supercritical Carbon Dioxide Extraction of Rice Bran Oil and γ-Oryzanol Using Multi-Factorial Design of Experiment

Optimization of ultrasonic-assisted extraction of natural antioxidants from rice bran using response surface methodology

Transesterification of Methyl Oleate for Sustainable Production of Biolubricant: Process Optimization and Kinetic Study

Deacidification of rice bran oil by liquid–liquid extraction using a renewable solvent

Wet Extraction of γ-Oryzanol From Rice Bran

Binary Solvent Extraction of Tocols, γ-Oryzanol, and Ferulic Acid from Rice Bran Using Alkaline Treatment Combined with Ultrasonication

Enhancement of Lipid Extraction from Soya Bean by Addition of Dimethyl Ether as Entrainer into Supercritical Carbon Dioxide

Extraction of Rice Bran Oil Using CO2-Expanded Hexane in the Two-Phase Region

Rice bran stabilization using autoclave and optimization of crude rice bran oil recovery using ultrasound-assisted extraction

Optimization of The Aqueous Enzymatic Extraction (AEE) of Rice Bran Oil With Cellulase Using Response Surface Methodology

Optimization of Ultrasound-assisted Extraction Process of Millet Bran Oil

Demulsification of water-in-heavy oil emulsions by oxygen-enriched non-ionic demulsifier: Synthesis, characterization and mechanisms

Assessment of alcoholic extraction of Jatropha curcas L. oil for potential reactive extraction towards fatty esters