Abstract:An efficient membrane based process for simultaneous degumming and deacidification of vegetable oil was investigated. Appropriate crude oil conditioning allow the formation of submicronic aggregates, composed with soaps molecules resulting from the neutralisation of FFA and PL, which are retained when microfiltrating. Initial flux for the 0.8 μm membranes (∼560 l/h m2) was about twice that of the 0.5 μm and about 10 times that of 0.2 μm membrane. The filtered oils showed good quality in the case of 0.2 and 0.5 μm membranes, but the use of 0.8 μm membranes has allowed some soaps to pass through. Two types of crude oils behaviour were noticed. Oppositely to some oils for which just simple neutralisation led to a satisfactory elimination of the phospholipids, others were very tough to refine. The operating pression seems not to affect the efficiency of the separation, whereas the stability of the vesicle-like aggregates is found to be greatly affected by the increase of the temperature above 25 °C. Beside the quasi-elimination of FFA, PL and water, minerals and pigments contents were also greatly lowered. When using an NaOH 20%, the lovibond yellow score lowered from around 28 to 10 in the case of sunflower oils and from ∼34 to 6–20 in the case of soya and rapeseed oils. The monoglycerides were almost undetectable after membrane processing whatever the type of the conditioning used. After processing, the diglycerides contents, which ranges in the tested crude oils between 0.8% and 1.0%, showed almost no changes for two oils, whereas noticeable increases were obtained for the other oils. Total phytosterols contents were systematically reduced. The reductions vary from 3% to 44% upon the case. Neutralisation with an NaOH 20% lead to higher sterol losses in comparison to NaOH 40%. All the sterol components contents were found to be reduced in almost similar proportions.Industrial relevanceConventional oil recovery and purification processes are continuousely sought to be replaced by gentler processing conditions. Membrane based oil refining operating at low temperatures and without the generation of waste water offer an interesting and promising approach towards “greener” technologies.

Optimization of operating conditions for lampante olive oil deacidification by short path molecular distillation: Waste valorization approach

Optimisation of Enzymatic Pretreatment of Soybean Oil Deodoriser Distillate for Concentration of Tocopherols

Redefining the waste: Sustainable management of olive mill waste for the recovery of phenolic compounds and organic acids

Technical and economic evaluation of separation of dimethyl disulfide from disulfide oil at liquefied petroleum gas treatment facilities of Assaluyeh gas refinery

Membrane-based simultaneous degumming and deacidification of vegetable oils

Optimization of process variables on two-step microwave-assisted transesterification of waste cooking oil

A New Deacidification Strategy for Crude Vegetable Oil：Removal of Free Fatty Acids via Photobiocatalytic Decarboxylation

An Efficient Deacidification Process for Safflower Seed Oil with High Nutritional Property through Optimized Ultrasonic-Assisted Technology

Enzymatic Deacidification of Alpha-Linolenic Acid -Enriched Oils with Negligible Change in Triacylglycerol Composition

Optimization of Deodorization Design for Four Different Kinds of Vegetable Oil in Industrial Trial to Reduce Thermal Deterioration of Product

Process optimization of esterification for deacidification in waste cooking oil: RSM approach and for biodiesel production assisted with ultrasonic and solvent

Condition optimization of simulated bio-oil molecular distillation via response surface method

Process Simulation of Steam Stripping of Bleached Palm Oil Deodorization for Removing Free Fatty Acids using DWSIM

Effects of deacidification methods on high free fatty acid containing oils obtained from sea buckthron (Hippophaë rhamnoides L.) berry

Design of alternate solvent for recovery of residual palm oil: simultaneous optimization of process performance with environmental, health and safety aspects

Application of Thermo-Malaxation Followed by Three-Phase Centrifugation to Enable the Biorefinery of Alperujo, the Main By-Product of Olive Oil

Sustainable Recovery of Phenolic Compounds from Distilled Rosemary By-Product Using Green Extraction Methods: Optimization, Comparison, and Antioxidant Activity

Optimization of preparation conditions of a novel low-cost natural bio-sorbent from olive pomace and column adsorption processes on the removal of phenolic compounds from olive oil mill wastewater

Sustainable design and multi-objective optimization of heat pump assisted extractive distillation process for separating a ternary mixture of methyl acetate, tetrahydrofuran and methanol

Effective Detoxification of Olive Mill Wastewater Using Multi-Step Surfactant-Based Treatment: Assessment of Environmental and Health Impact

Optimization of methyl ester synthesis using gas/liquid phase pulsed discharge plasma in a novel oscillatory slug flow reactor