Abstract:Leachable chromium in the incineration fly ash and wastewater sludge has been thermally stabilized by plasma melting at the temperature of 1,773 K. To better understand how chromium is stabilized with the high-temperature treatment, chemical structure of the slags sampled at temperature zones of 1,100–1,700 K has been studied by synchrotron X-ray absorption spectroscopy. The component-fitted X-ray absorption near edge structure spectra of chromium indicate that the main chromium compounds in the sludge and fly ash are Cr(OH)3, Cr2O3, and CrCl3. A small amount of toxic CrO3 is also observed in the fly ash. In the plasma melting chamber under the reducing environment, the high-oxidation state chromium is not found. The slags in the plasma melting chamber have much less leachable chromium, which is due to chemical interactions between chromium and SiO2 in the slags. The existence of the interconnected Cr-O-Si species is observed by refined extended X-ray absorption fine structure spectroscopy. In the Cr2O3 phase of the slags, their bond distances, and coordination numbers for the first (Cr-O) and second (Cr-(O)-Cr) shells have insignificant perturbation when experienced with different melting temperatures between 1,300 and 1,700 K. It seems that Cr2O3 and chromium encapsulated in the silicate matrix of the slags have relatively much lower leachability. With this concept, to obtain a low chromium leachability slag from the plasma melting process, the residence time of the melting chamber may be decreased, and the slag discharge temperatures may be increased to 1,300 K. This work also exemplifies utilization of molecule-scale data obtained from synchrotron X-ray absorption spectroscopy to reveal how chromium is thermally stabilized in a commercial scale plasma melting process.

Chromium removal from chromium gypsum through microwave hydrothermal crystal phase regulation

Chromium Removal from Aqueous Solution by Microwave-Modified Phosphogypusum

Detoxification and Reclamation of Hydrometallurgical Arsenic- and Trace Metals-Bearing Gypsum Via Hydrothermal Recrystallization in Acid Solution.

Efficient extraction of impurities from phosphogypsum during crystal regulation of α‐hemihydrate gypsum

Deep removal of phosphorus and synchronous preparation of high-strength gypsum from phosphogypsum by crystal modification in NaCl-HCl solutions

Study on the Immobilisation Mechanism of Chromium under Microwave Sintering

Tracking of Chromium in Plasma co-Melting of Fly Ashes and Sludges

Desorption Trials and Granular Stability of Chromium Loaded Aerobic Granular Sludge from Synthetic Domestic Wastewater Treatment

Dehydration of gypsum waste to recyclable anhydrite using a nano-film reservoir under ambient conditions

Chromium removal at neutral pHs via electrochemical Cr(VI) reduction and subsequent Cr(III) adsorption with MoS 2 nanoflowers-modified graphite felt

Solidification and Release Characteristics of Heavy Metals in Gypsum from Coal-Fired Power Plants

Chromium removal from ion-exchange waste brines with calcium polysulfide

Chromium immobilization from wastewater via iron-modified hydrochar: Different iron fabricants and practicality assessment

Efficient removal of natural organo-chromium(III) through self-circulating decomplex and immobilization with nanoscale zero-valent iron

Chemical reduction remediation of chromium residue and soil mixture from a chromium-contaminated site

Application of zeolitic material synthesized from thermally treated sediment to the removal of trivalent chromium from wastewater.

Hydrothermal Processing, Characterization and Leaching Toxicity of Cr-added “fly Ash-Metakaolin” Based Geopolymer

Experimental Study on the Environmental Effects and Mechanical Characteristics of Solidified Cr(VI)-Contaminated Soil Based on Slag and Desulfurization Gypsum

Preparation of a cationic hydrogel microsphere adsorbent for efficient removal of hexavalent chromium from aqueous solution

Efficient removal of iron from red gypsum via synergistic regulation of gypsum phase transformation and iron speciation

Water/acid/reductive biomass leaching of Cr(VI) in chromium ore processing residue (CORP) for safe discharge of effluent and to recover Cr(III) and gypsum