Abstract:Compared with light intensity measurements of turbid liquids based on direct or lock-in amplification methods, the square excitation method (SEM) can be used to obtained abundant information from both the time- and frequency-domains. Voltage-based turbidimetry in the time domain (The voltage readout here refers to the signal obtained directly by the photodetector followed by an amplifier and is a function of the light intensity attenuated by scattering and absorption effects) is subject to measurement error because of the heterogeneous size distribution of suspended particles, fluctuations of the light source, and measurement noise. In this work, a novel low-cost turbidity sensor was proposed by combining spectral component extraction (SCE) with the transmitted (It) and scattered (Is) light signals and their ratio (It/Is). A near-infrared Light Emitting Diode (NIR-LED) at 860 nm was employed as the light source to reduce the system cost. Two independent preprocessing channels composed of a photodiode, a transimpedance amplifier, and a band-pass filter converted the modulated light to signals of a suitable scale. For conversion of the conditioned analog signals, a 16-bit analog-to-digital converter was used and the signal was further processed using a high-performance microcontroller (STM32F405). The SCE algorithm and turbidity correlation were implemented via the integrated digital-signal-processer combined with Fast Fourier Transform digital algorithm. Averaging of multiple measurements further improved the measurement precision when using the first, third, and fifth spectral components that were related to a known turbidity. The calibration measurements for the sensor revealed that the correlation coefficients from the linear fitting were reliable and satisfactory when using It, Is, and (It/Is). Additionally, validation measurements further demonstrated that the proposed sensor had low measurement error. The maximum measured error was 6 % for a turbidity of 10 NTU while the lowest relative error was 0.4 % for the 280 NTU solution. The results demonstrate that the sensor has potential for automatic in-situ turbidity measurement applications, particularly for in-situ extraction processes used in Traditional Chinese Medicine.

Miniaturized Optical Fiber Turbidity Sensor for Turbidity Monitoring in Constricted Space

Microfiber Optical Sensors: A Review

Tapered Optical Fiber Sensing Technology

Femtoliter-scale Optical Nanofiber Sensors.

A Low-Cost Portable Optical Fiber-Based Sensor for Water Turbidity Measurement

A Glass-Fiber-Optic Turbidity Sensor for Real-Time In Situ Water Quality Monitoring

In situ surface turbidity sensor based on localized light scattering from tilted fiber Bragg gratings

A novel low-cost turbidity sensor for in-situ extraction in TCM using spectral components of transmitted and scattered light

Experimental Research on an Optical Fiber Temperature and Stress Sensor Based on the Time Offset

Miniaturized Spectroscopy System Based on a Semiconductor Nanofilm

Angle-Independent Broadband Miniaturized Spectrometers

Three-Wavelength Fiber Laser Sensor With Miniaturization, Integration for the Simultaneous Measurement of Underwater pH, Salinity, Temperature, and Axial Strain

Miniature Fiber-Optic Strain Sensor Based on a Hybrid Interferometric Structure

A Novel Kind of Turbidity Sensor and its Measurement Method

Simultaneous Measurement of the BOD Concentration and Temperature Based on a Tapered Microfiber for Water Pollution Monitoring.

Towards the Development of an Affordable and Practical Light Attenuation Turbidity Sensor for Remote Near Real-Time Aquatic Monitoring

High-resolution, large-dynamic-range multimode interferometer sensor based on a suspended-core microstructured optical fiber

Ultracompact Optical Fiber Sensor for Inner Diameter Measurement

Simultaneous Measurement of Microdisplacement and Temperature Based on Balloon-Shaped Structure

Miniature Fiber Pressure Sensor Based on an In-Fiber Confocal Cavity

A Highly Sensitive Deep-Sea In-Situ Turbidity Sensor With Spectrum Optimization Modulation-Demodulation Method