Abstract:Circular synthetic aperture radar (CSAR) possesses the capability of multi-angle observation, breaking through the geometric observation constraints of traditional strip SAR and holding the potential for three-dimensional imaging. Its sub-wavelength level of planar resolution, resulting from a long synthetic aperture, makes CSAR highly valuable in the field of high-precision mapping. However, the motion geometry of CSAR is more intricate compared to traditional strip SAR, demanding high precision from navigation systems. The accumulation of errors over the long synthetic aperture time cannot be overlooked. CSAR exhibits significant coupling between the range and azimuth directions, making traditional motion compensation methods based on linear SAR unsuitable for direct application in CSAR. The dynamic nature of flight, with its continuous changes in attitude, introduces a significant deformation error between the non-rigidly connected Inertial Measurement Unit (IMU) and the Global Positioning System (GPS). This deformation error makes it difficult to accurately obtain radar position information, resulting in imaging defocus. The research in this article uncovers a correlation between the deformation error and radial acceleration. Leveraging this insight, we propose utilizing radial acceleration to estimate residual motion errors. This paper delves into the analysis of Position and Orientation System (POS) errors, presenting a novel high-resolution CSAR motion compensation method based on airborne platform acceleration information. Once the system deformation parameters are calibrated using point targets, the deformation error can be directly calculated and compensated based on the acceleration information, ultimately resulting in the generation of a high-resolution image. In this paper, the effectiveness of the method is verified with airborne flight test data. This method can compensate for the deformation error and effectively improve the peak sidelobe ratio and integral sidelobe ratio of the target, thus improving image quality. The introduction of acceleration information provides new means and methods for high-resolution CSAR imaging.

A Robust Track Estimation Method for Airborne SAR Based on Weak Navigation Information and Additional Envelope Errors

On trackability of a moving target by fixed-wing UAV using geometric approach

Trajectory Deviation Estimation Method for UAV-Borne Through-Wall Radar

A Geometric Auto-Calibration Method for Multiview UAV-Borne FMCW SAR Images

An NCS-Based WLS Estimator for Airborne Microwave Photonic SAR Autofocus

An Autofocus Approach for UAV-Based Ultrawideband Ultrawidebeam SAR Data With Frequency-Dependent and 2-D Space-Variant Motion Errors

A High-Frequency Motion Error Compensation Algorithm Based on Multiple Errors Separation in BiSAR Onboard Mini-UAVs

Improved Moving Target Imaging Method for a Multichannel HRWS SAR System

A Robust Motion Compensation Approach for UAV SAR Imagery

An improved motion compensation method for high resolution UAV SAR imaging

UAV-enabled Integrated Sensing and Communication: Tracking Design and Optimization

Motion Compensation for UAV SAR Based on Raw Radar Data

Precise Motion Compensation Approach for High-Resolution Multirotor UAV SAR in the Presence of Multiple Errors

An Adaptive False Target Suppression and Radial Velocity Estimation Method of Moving Targets Based on Image-Domain for High-Resolution and Wide-Swath SAR

Cauchy Kernel-Based AEKF for UAV Target Tracking via Digital Ubiquitous Radar Under the Sea–Air Background

A Novel Method for Airborne SAR Tomography Baseline Error Correction Driven by Small Baseline Interferometric Phase

Estimation of Residual Motion Errors and Phase Ambiguity for Repeat-Pass In-CSAR Without External DEMs

Robust Target Detection and Estimation for Airborne STAP Radar with Arbitrary Array Errors and Target Uncertainty

Position and Orientation System Error Analysis and Motion Compensation Method Based on Acceleration Information for Circular Synthetic Aperture Radar

An Efficient Phase Error Calibration Method for Azimuth Multichannel SAR Based on Least Spectrum Difference