Abstract:Low-temperature operation is a challenge for solid-lithium-metal batteries (LMBs), and insufficient ionic conductivity is the main obstacle. Herein, guided by the molecular dynamics simulations (MDS), a solid polymer electrolyte (SPE) based on poly(1,3-dioxolane) (PDOL) with sufficient ionic conductivity at low temperature is reported. In situ X-ray diffraction (XRD) and differential scanning calorimetry (DSC) tests reveal that the PDOL-based SPE could well maintain amorphous nature at low temperatures, contributing to excellent ionic transport. The MDS analysis of the Li–O coordination environment indicates that more oxygen atoms bonded with Li+ in PDOL than in poly(ethylene oxide) (PEO) at low temperatures, thus we could envision the preponderance of PDOL as a better polymer matrix of SPE for low-temperature solid LMBs. It delivers a high capacity of 103 mAh g–1 and 85% retention for 200 cycles for Li||LiFePO4 at −20 °C, showing great potential for application in low-temperature solid LMBs in cold climates.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c14825.Experimental methods; MDS characterization; SEM image of the low-temperature PDOL SPE on Li foil; TG curves for PDOL polymer and DOL liquid; GPC result for PDOL polymer; in situ XRD patterns; open-circuit voltage (OCV) curve of the assembled PDOL-based Li||LiFePO4 battery; charge/discharge profiles of Li||PI cells; step data from 25 to −40 °C in one PDOL-based Li||LiFePO4 cell; rate performance of Li||LiFePO4 cells at −20 °C; performance of PDOL-based Li||LiFePO4 cell with LiFePO4 loading of 24 mg cm–2 at −20 °C; enlarged polarization voltage of Li||Li batteries at different temperatures in Figure 5a; Nyquist plot of symmetric Li||Li cells at various temperatures; rate performance of symmetric Li||Li cells at −20 and 25 °C; rate performance of PDOL-based Li||LiFePO4 cell at 25 °C; cyclic performances of PDOL-based Li||LiFePO4 batteries at 25 and 50 °C; chronopotentiometry results of PDOL-based SPE at 25 and 50 °C; electrochemical window of the PDOL-based SPE at different temperatures; influence of DADS on the battery performances; cross-sectional SEM image of cycled Li anode; Fourier transform infrared (FTIR) spectra of the DADS monomer and PLAS; X-ray photoelectron spectroscopy (XPS) spectra of the cycled Li anode; and 1H NMR spectra of the DADS monomer and PLAS (PDF)This article has not yet been cited by other publications.

Contriving gel polymer electrolyte to drive quasi-solid-state high-voltage Li metal batteries at ultra-low temperatures

Gel electrolyte with dimethyl sulfoxide confined in a polymer matrix for Li-air batteries operable at sub-zero temperature

Loosely coordinating diluted highly concentrated electrolyte toward −60 °C Li metal batteries

A Carboxylic Ester-Based Electrolyte with Additive to Improve Performance of Lithium Batteries at Ultra-Low Temperature

Moderate solvation structure of lithium ions for high-voltage lithium metal batteries at −40 oC

Competitive Coordination of Ternary Anions Enabling Fast Li‐Ion Desolvation for Low‐Temperature Lithium Metal Batteries

Anion‐Dominated Conventional‐Concentrations Electrolyte to Improve Low‐Temperature Performance of Lithium‐Ion Batteries

Tailoring polymer electrolyte ionic conductivity for production of low- temperature operating quasi-all-solid-state lithium metal batteries

Engineering of hydrogel electrolyte for aqueous Zn||LiFePO4 battery on subzero-temperature adaptability, long cycles and mechanical safety

In Situ Fabricated Quasi‐Solid Polymer Electrolyte for High‐Energy‐Density Lithium Metal Battery Capable of Subzero Operation

In Situ-Initiated Poly-1,3-dioxolane Gel Electrolyte for High-Voltage Lithium Metal Batteries

Polyether‐b‐Amide Based Solid Electrolytes with Well‐Adhered Interface and Fast Kinetics for Ultralow Temperature Solid‐State Lithium Metal Batteries

Dissociating high concentration lithium salts in LLZTO-based high dielectric polymer electrolytes for low temperature Li metal batteries

1 μm‐Thick Robust Gel Polymer Electrolyte with Excellent Interfacial Stability for High‐Performance Li Metal Batteries

In Situ Solidified Gel Polymer Electrolytes for Stable Solid−State Lithium Batteries at High Temperatures

Molecular Simulations Guided Polymer Electrolyte towards Superior Low-Temperature Solid Lithium-Metal Batteries

Activating Ultra-Low Temperature Li-metal Batteries by Tetrahydrofuran-Based Localized Saturated Electrolyte

Gel Polymer Electrolyte Enables Low-Temperature and High-Rate Lithium-Ion Batteries via Bionic Interface Design

Wide-temperature Rechargeable Li Metal Batteries Enabled by an In-Situ Fabricated Composite Gel Electrolyte with a Hierarchical Structure

Polymer Electrolytes with High Ionic Conductivities at Freezing Temperature for Aqueous Hybrid Batteries