Abstract:The reactor coolant pump is a key equipment in a nuclear power plant. If the leakage exceeds a certain threshold, it may cause reactor overheating and shutdown. The reactor coolant pump leakage fault usually has two problems: corrosion and scaling. Accurately and efficiently diagnosing the leakage fault mode as early as possible and predicting its remaining useful life (RUL) are important for taking timely maintenance measures. In this paper, an integrated method is proposed. First, the cross-sectional area of the first seal is extracted as a fault indicator. The motivation is that corrosion may enlarge the cross-sectional area, and scaling may reduce the cross-sectional area. Based on the fluid mechanics theory, an integrated model with several uncertain parameters is established among the cross-sectional area, temperature, and leakage at the inlet and outlet of the first seal. In the diagnosing process, a modified change-detection method is proposed to detect the starting point of degradation. Then, the unknown parameters in the previous relation are estimated, and the degrading data before the starting point of degradation are used to diagnose the leakage fault mode. Second, a time-series model of the autoregressive integrated moving average (ARIMA) is established to predict the remaining useful life based on the degrading data after the starting point of degradation. Finally, the leakage degrading data from six reactor coolant pumps of a nuclear power plant is used to perform the leakage fault mode diagnosis and life prediction with degradation point detection error rates not exceeding 4%, fault mode diagnosis correction rates 100% and practical RUL predicting results, which proves that the proposed integrated method is accurate and efficient. The proposed integrated method combines the advantages of both the physical model diagnosis and the data-driven model diagnosis and innovatively make use of the quantity of flow from the output side of the primary pump as the monitoring indicator and the cross-sectional area as the characteristic index together to diagnose the leakage fault mode happened to the seal and predict its RUL, which can meet the needs of actual operation and maintenance to ensure a healthy and stable operation of the pump and prevent unexpected shutdowns of nuclear power plants and serious accidents.

Research on unsupervised condition monitoring method of pump-type machinery in nuclear power plant

Condition Monitoring for Nuclear Turbines with Improved Dynamic Partial Least Squares and Local Information Increment

Review of Research on Condition Assessment of Nuclear Power Plant Equipment Based on Data-Driven

Power plant circulating water pump predictive state evaluation method and system

A Novel Transformer‐Based Anomaly Detection Model for the Reactor Coolant Pump in Nuclear Power Plants

Condition monitoring and early fault warning of power plant auxiliary equipment using LSTM-SDAE model with an adaptive threshold

Uncertainty‐aware Nuclear Power Turbine Vibration Fault Diagnosis Method Integrating Machine Learning and Heuristic Algorithm

Multi-step prediction of main pump leakage in nuclear power plants with an additive model

An integrated method for the leakage fault mode diagnosis and life prediction of the reactor coolant pump

Health Assessment for Crane Pumps Based on Vehicle Tests Using Deep Autoencoder and Metric Learning.

Improved methods of online monitoring and prediction in condensate and feed water system of nuclear power plant

A Health Monitoring Model for Circulation Water Pumps in a Nuclear Power Plant Based on Graph Neural Network Observer

Deep learning application for monitoring degradation in nuclear safety systems

Multivariate state estimation-based condition monitoring of slurry circulating pumps for wet flue gas desulfurization of power plants

Health State Identification Method of Nuclear Power Main Circulating Pump Based on EEMD and OQGA-SVM

State Monitoring for Centrifugal Pump of Pwr Based on Hmm and Svm

Adaptive and Self-supervised Condition Monitoring Method for Machinery

A Condition Monitoring Method of Hydraulic Gear Pumps Based on Multilevel Mechanism-Data Fusion

A Universal Hydraulic-Mechanical Diagnostic Framework Based on Feature Extraction of Abnormal On-Field Measurements: Application in Micro Pumped Storage System

The Unknown Abnormal Condition Monitoring Method for Pumped-Storage Hydroelectricity

Condition Evaluation of Power Equipment Based on Data Mining and Principal Component Analysis