Abstract:Torque ripples of permanent magnet synchronous motor (PMSM) will degrade the torque performance of PMSM drive systems in high-performance applications and are one of the sources of vibration and noise. To reduce torque ripples, one of the solutions is to inject harmonic currents into stator windings, so that extra torque ripples are generated to compensate for the original ones. To obtain the optimal harmonic current solutions, torque ripple model (TRM) and speed harmonics are commonly used in optimization. However, the performance of TRM based methods in torque ripple reduction is limited due to the accuracy of the PMSM TRM model and motor parameters. Also, the speed harmonic based methods have speed limitations, since the speed harmonics caused by torque ripples will be filtered out by the inertia of the drive systems when the motor is operated over the cut-off frequency. Therefore, one torque ripple reduction method with no motor parameters involved and with no speed limitations needs to be discussed and proposed. In this paper, the response surface torque ripple model for PMSM drives is first established based on the measurements of speed harmonics. Based on the response surface torque ripple model, the motor-parameter-free solution of optimal harmonic currents is analytically derived for torque ripple reduction with minimal motor loss. The proposed method is verified by experimental results, which demonstrate that the proposed method can reduce torque ripples of PMSM drives effectively without prior knowledge of any motor parameters and can also avoid the limitation of speed operations.

Current Harmonics in Surface-Mounted PMSM Electrical Drive for Monitoring Torsional Vibrations

A Novel Harmonic Current Control Method for Torque Ripple Reduction of SPMSM Considering DC-Link Voltage Limit

Hybrid Frame-Based Current Control Scheme for LC-Equipped PMSM with Non-Sinusoidal Back-EMF

Current Control Scheme for LC-Equipped PMSM Drive Considering Decoupling and Resonance Suppression in Synchronous Complex-Vector Frame

Analytical Modeling of Current Harmonic Components in PMSM Drive With Voltage-Source Inverter by SVPWM Technique

Quantitative Harmonics Performance Evaluation of High-Speed Permanent Magnet Synchronous Machine under Various Synchronous SVPWM Strategies

Spatial-Harmonic Modeling and Analysis of High-Frequency Electromagnetic Vibrations of Multiphase Surface Permanent-Magnet Motors

Dynamic Modeling and Harmonic Analysis of Surface-Mounted Three-Phase AC Permanent Magnet Synchronous Motor

Detection of Stator Winding Faults in PMSMs Based on Second Harmonics of Phase Instantaneous Reactive Powers

Harmonic Model and Remedy Strategy of Multiphase PM Motor under Open-Circuit Fault

Analysis of DC-Link Low-Frequency Current Harmonics in Multi-Source Multi-Three-Phase Electric Drives

A Deadbeat Predictive Current Harmonics Suppression Method for IPMSM Based on Quasi Proportional Resonant Control

Robust Stator Winding Fault Detection in PMSMs with Respect to Current Controller Bandwidth

SVPWM Sideband Harmonic Analysis in Permanent Magnet Synchronous Motor Driven by Voltage Source Inverter

High-frequency Modelling of Permanent Magnet Synchronous Motor with Star Connection

Investigation of Magnetic Field Interharmonics and Sideband Vibration in the FSCW IPMSM Drive With the SPWM Technique

Fault Signal Propagation Through the PMSM Motor Drive Systems

A High-Precision Model for Dual Three-Phase PMSM Considering the Effect of Harmonics, Magnetic Saturation and Electromagnetic Coupling

Torque Ripple Reduction Method for Permanent Magnet Synchronous Machine Drives With Novel Harmonic Current Control

Fault Detection for PMSM Motor Drive Systems by Monitoring Inverter Input Currents

Motor-Parameter-Free Solution of Optimal Harmonic Currents for Torque Ripple Reduction of PMSM Drives with Response Surface Method