Abstract:Highlights • The Mg-Zn-Nd-Zr/HA composites exhibit higher osteogenic activity in vivo differently from in vitro osteogenic expression. • The corrosion behavior of Mg-Zn-Nd-Zr/HA composites prepared by friction stir processing depends on comprehensive effects of grain refinement and localized corrosion. • Severe plastic deformation by stirring friction processing in composites preparation leads to significant grain refinement, improved mechanical properties and uniform distribution of reinforcements. • A guiding principle for the design of degradable magnesium matrix composites should be based on comprehensive consideration of the processing method, type, content and distribution of the reinforcement, especially the effect of powder agglomeration on the degradation behavior and biological properties. Biodegradable magnesium-matrix composites (BMMCs) added with bone-like compounds such as hydroxyapatite (HA) have promising orthopedic application potential, but the in vivo results of BMMCs are insufficient, and the difference between in vitro and in vivo are not clarified. In this work, Mg-Zn-Nd-Zr/(10/15/20wt%) HA (Ca 10 (PO 4 ) 6 OH 2 ) composites were prepared through friction stirring processing (FSP). It was found that corrosion rate of the composites increased with increase of the HA content, where the corrosion rate from hydrogen evolution of the Mg/10wt% HA was about 0.107 mm/y, showing better corrosion resistance compared with other BMMCs, and the agglomeration of HA powders significantly aggravated the localized corrosion. The ALP specific activity of the MC3T3-E1 cells cultured for 14 days with Mg/10wt% HA (2.12 IU/mg) was higher than that of the matrix (1.85 IU/mg), but there was no difference with the FSP group (2.13 IU/mg). In the early implantation of the rabbit femur, bone volume fraction (BV/TV) of Mg/10wt% HA was 10.69, which was higher than that of the FSP group (6.35). The histological staining showed that the Mg/10wt% HA implant was surrounded by more trabecular bone tissue, exhibiting better osteoinductive regeneration. The Mg-Zn-Nd-Zr/HA composites exhibit higher osteogenic activity in vivo differently from in vitro osteogenic expression.

In vitro degradation and in vivo osteogenesis of Mg-Zn-Nd-Zr/HA composites prepared by friction stir processing

Manufacture of Biodegradable Magnesium Alloy by High Speed Friction Stir Processing

In Vitro and Vivo Biocompatibility and Degradability of Low-Alloyed Mg-Zn-Ca-MgO Composite As Bone Repair Biomaterials

Effect of Nano-Ha Content on the Mechanical Properties, Degradation and Biocompatible Behavior of Mg-Zn/HA Composite Prepared by Spark Plasma Sintering

Microstructure, Mechanical Properties, In Vitro Biodegradability, and Biocompatibility of Mg-Zn/HA Composites for Biomedical Implant Applications

In Vitro and in Vivo Studies on Zinc-Hydroxyapatite Composites As Novel Biodegradable Metal Matrix Composite for Orthopedic Applications

The microstructure, mechanical properties, corrosion performance and biocompatibility of hydroxyapatite reinforced ZK61 magnesium-matrix biological composite

Biodegradation Resistance And Bioactivity Of Hydroxyapatite Enhanced Mg-Zn Composites Via Selective Laser Melting

In Vivo Degradation and Bone Response of A Composite Coating on Mg-Zn-Ca Alloy Prepared by Microarc Oxidation and Electrochemical Deposition

In-vitro bio-corrosion behavior of friction stir additively manufactured AZ31B magnesium alloy-hydroxyapatite composites

In Vitro Biodegradation and Mechanical Properties of Mg-Zn Alloy and Mg-Zn-Hydroxyapatite Composite Produced by Mechanical Alloying for Potential Application in Bone Repair

Research on corrosion behavior and biocompatibility of a porous Mg-3%Zn/5%β-Ca3(PO4)2 composite scaffold for bone tissue engineering

Multi-step fabrication of bioactive Mg–Zn–Dy–AlO3/HA composites: exploring the synergistic effects of plasma spray and friction stir processing

Research on corrosion behavior and biocompatibility of a porous Mg–3%Zn/5%β-Ca(PO) composite scaffold for bone tissue engineering

Preparation of HA-Coated Mg-4.0Zn-1.0Ca-0.6Zr(wt%) Alloy and Its Biodegradation Behaviors

In Vitro Degradation and In Vivo Biocompatibility of Strontium-Doped Magnesium Phosphate-Reinforced Magnesium Composites

In Vitro and in Vivo Studies on As-Extruded Mg- 5.25Wt.%zn-0.6Wt.%ca Alloy As Biodegradable Metal

In Situ Phosphorus-Modified Mg2Ge/Zn-Cu Composite with Improved Mechanical, Degradation, Biotribological Properties, and in Vitro and in Vivo Osteogenesis and Osteointegration Performance for Biodegradable Bone-Implant Applications

In Vitro Corrosion Behavior and in Vivo Biodegradation of Biomedical Β-Ca3(po4)2/mg–zn Composites

Effect of Magnesium Particle Fraction on Osteoinduction of Hydroxyapatite Sphere-Based Scaffolds

Developing composite of ZE41 magnesium alloy- calcium by friction stir processing for biodegradable implant applications