Abstract:Pixel crosstalk resulted by the inherent Lambertian radiation of LED chips significantly hiders the quality of mini/micro‐LED display devices. Fully enclosed composite micro/nano‐package structure and in situ nanoimprint technology is proposed in this paper. By composite micro/nano‐packaging, the divergence angle of the single pixel decreases to 72°, and the light‐extraction efficiency increases 18.4%. Micro/mini‐light emitting diode (LED) arrays are regarded as the most promising next generation of display devices. However, the inherent Lambertian radiation of LED chips results in a significant pixel crosstalk. To improve the display quality, high‐quality micro/mini‐LED display pixels with fully enclosed composite micro/nano‐packages and in situ nanoimprint technology are proposed and demonstrated in this work. The nanoimprint template is designed as a composite structure comprising an intermediate sandwich cavity array and thin‐bottom nanostructure layer. Contact is maintained between the template and LED chips array substrate. By vacuuming the sealed sandwich cavities, the thin‐bottom nanostructure layer is deformed to drive the upward protrusion of the liquid optical polymer. Moreover, the nanocavities on the thin nanostructure layer are fully filled by the polymer, forming a composite micro/nano‐package. The characteristics of the composite micro/nano‐package, such as the aperture and protrusion height, can be flexibly adjusted by changing the template structure or process parameters. A 6 × 8 array LED chips display device enclosed by a composite micro/nanopackage is developed. The divergence angle of the single LED chip decreases to 72° from the original 138°, the light‐extraction efficiency increases18.4%, and the luminescence spectrum and current‐voltage characteristics changes only minimally.

Development of Metal Bonding for Passive Matrix Micro-LED Display Applications

The improvement of bonding metal layers for high resolution micro-LED display application

23‐3: Application of Laser‐Assisted Bonding in Micro‐LED display technology

Application of metal interconnection process with micro-LED display by laser-assisted bonding technology

A Fully-Integrated Micro-Display System With Hybrid Voltage Regulator

Process optimization of preparing CMOS backplane for ultrahigh pixel density red Micro-LED display

Monolithic Full-Color Micro-LED Displays Featuring Three-Dimensional Chip Bonding and Quantum Dot-Based Color Conversion Layer

Wafer-Level Monolithic Integration of Vertical Micro-LEDs on Glass

Investigating the Performance and Reliability of Au-Sn Bonded Flip-Chip Micro-LEDs

59‐3: Distinguished Paper: Wafer Scale Hybrid Monolithic Integration of Si‐based IC and III‐V Epilayers ‐ a Mass Manufacturable Approach for Active Matrix micro‐LED Displays

Alleviating the Crosstalk Effect Via a Fine-Moulded Light-Blocking Matrix for Colour-Converted Micro-Led Display with a 122% NTSC Gamut

Monolithically Integrated μ LEDs/HEMTs Microdisplay on a Single Chip by a Direct Epitaxial Approach

Active matrix monolithic micro‐LED full‐color micro‐display

Highly Efficient Full‐Color Inorganic LEDs on a Single Wafer by Using Multiple Adhesive Bonding

Monolithic integration of AlGaInP-based red and InGaN-based green LEDs via adhesive bonding for multicolor emission

Development of Digital Signage Modules composed of Mini-LEDs using Laser-Assisted Bonding (LAB) Technology

Printed Assemblies of Inorganic Light-Emitting Diodes for Deformable and Semitransparent Displays

Fully Enclosed Composite Micro/Nano‐Package for High‐Quality Micro‐LED Display Pixels and In Situ Nanoimprint Technology

Flexible high-resolution micro-LED display device with integrations of transparent, conductive, and highly elastic hydrogel

Concurrent self-assembly of RGB microLEDs for next-generation displays

3400 PPI Active-Matrix Monolithic Blue and Green Micro-LED Display