Abstract:Prefabricated converter station building has been gradually applied in the field of power engineering construction due to the advantages of standardized design, high construction efficiency, and quality control. The beam–column joint is the essential constitutive part to ensure structural integrity and reliable force transmission for the prefabricated structure. In this paper, a novel load bearing-energy dissipation connection is proposed and applied to the beam–column joint to improve seismic performance and seismic resilience. Pseudo-static tests were conducted on the beam–column joint with the load bearing-energy dissipation connection, and the test results demonstrated that the tested beam–column joints developed with similar failure modes, and the damage was concentrated in the load bearing-energy dissipation connection while the beam and column remained elastic. The beam–column joint with the load bearing-energy dissipation connection had stable hysteresis behavior, with favorable bearing capacity and energy dissipation behavior. A shorter slip length and a larger bolt distance could lead to better stress development and enhance the bearing capacity, while the slip length barely affected the ductile behavior. Moreover, a finite element model was established and validated to extend the parametric study to provide a preliminary understanding of the mechanical mechanism of the proposed beam–column joint with the load bearing-energy dissipation connection. It was confirmed that the load–-deformation behavior was greatly affected by the slip length, but the slip length barely affected the initial stiffness. The width of the sliding steel fuse influenced the bearing capacity and the degradation behavior. A wider width could lead to a higher bearing capacity and improve the degradation behavior. Based on the analysis of the stress development and stress distribution corresponding to different feature points, it was concluded that the use of bearing-energy dissipation improved the stress development in the framing components and achieved damage concentration.

Seismic performance of a steel frame structure with dissipative cladding connections

Experimental Investigation of Steel Frames with Infill Prefabricated Reinforce-Concrete Shear Walls

Seismic Behaviors of High-Strength Bolted End-Plate Connected Composite Steel Beam and Square Concrete Filled Steel Tube Column Frames

Experimental Study on Seismic Behavior of Steel Frame with Prefabricated Reinforced Concrete Infill Slit Shear Walls

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Seismic performance of precast concrete frame with energy dissipative cladding panel system: Half-scale test and numerical analysis

Seismic performance assessment of eccentrically braced steel frame using demountable-metallic-corrugated-shear-panel dampers

Seismic performance study of a novel steel truss energy dissipation coupling beam

Seismic behavior evaluation of friction-bearing type connection with slit dampers

Seismic behavior of steel frame infilled with wall-panels connected by sliding joint

Experimental Study on the Seismic Performance of New Energy Dissipation Connectors in an Autoclaved Aerated Concrete Panel with Assembled Steel Frame

Numerical Analysis Study on Seismic Performance of Semi-Rigid Steel Frame Infilled with Prefabricated Composite Wall Panels

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Experimental seismic behaviors of different connections to CFST end-columns in shear walls

Seismic performance of discontinuous cover-plate connection for prefabricated steel plate shear wall

Blast Mitigation Performance of a Novel Cladding–connector System

Quasi-static tests and parametric simulations of hybrid steel frame and light wood shear walls with frictional dampers

Seismic performance of self-centring connections with two energy dissipation stages for reusable modular steel buildings

The Hysteresis Behavior of Steel Beam–Column Joint with the Load Bearing-Energy Dissipation Connection for Converter Station Building

A Dissipative Connector for CLT Buildings: Concept, Design and Testing

Seismic performance of a steel frame assembled with a CFST-bordered composite wall structure