Smoothed TCM-DPWM and Input Current Ripple Reduction for Three-Phase DC-AC ZVS Inverters
Yuan Feng,Yueshi Guan,Hongqi Ben,Yijie Wang,Shunfeng Yang,Dianguo Xu
DOI: https://doi.org/10.1109/tpel.2024.3440501
IF: 5.967
2024-01-01
IEEE Transactions on Power Electronics
Abstract:With the development of wide bandgap devices, the research and development of wide-frequency, high-efficiency, high-power-density three-phase inverters can play a positive role in the fields of electric vehicles, and microgrid. However, existing three-phase inverter schemes struggle to keep balance among wide output frequency range, high efficiency, high power density, and low EMI, while maintaining simple hardware structure and control strategies. In this article, based on the three-phase two-level inverter topology with dc-link connected output capacitors, a novel triangular current mode discontinuous pulsewidth modulation (TCM-DPWM) method is proposed. This method achieves the aforementioned advantages with a simple hardware and offers higher efficiency compared to existing modulation techniques. Initially, a smoothed DPWM method is introduced to enable smooth transitions at unsmooth points. Building on this method, a TCM-based approach is further proposed to achieve zero voltage switching (ZVS) soft-switching, significantly reducing the turn-on losses of the switching devices. As the connection to dc-link of the output capacitors may lead to substantial input current ripple, two methods using resonant input filter and split output capacitors are presented to reduce this ripple. Employing the proposed methods, a prototype using GaN devices is constructed, achieving a full-load (490 W) efficiency of 98.478% and a power density of 245 W/in(3). The prototype could reach an output frequency of up to 400 Hz, with the input current ripple reduced to about 10%.