Interconnected Nanorods–Nanoflakes Li2Co2(MoO4)3 Framework Structure with Enhanced Electrochemical Properties for Supercapacitors
Kalele Mulonda Hercule,Qiulong Wei,Owusu Kwadwo Asare,Longbing Qu,Aamir Minhas Khan,Mengyu Yan,Chunhui Du,Wei Chen,Liqiang Mai
DOI: https://doi.org/10.1002/aenm.201500060
IF: 27.8
2015-01-01
Advanced Energy Materials
Abstract:demonstrated a spontaneous intercalation of large range of cations into 2D MXenes layers providing an excess capacitance. Moreover, Mefford et al. [ 8 reported an anion-based and oxygen intercalation charge storage mechanism for a nanostructured perovskite-type material. All these works indicate that an ion intercalation charge storage can occur through cation or anion intercalation in the bulk material. Besides, owing to the material destruction during the electrochemical process, low rate capability and cyclability remain a drawback to achieve practical application of pseudocapacitive materials. Thus, it is a chal-lenge to fi nd a pseudocapacitive material, which can simulta-neously accommodate fast ion intercalation and sustain large-cycle stability. To overcome this challenge, materials with tunnel structure such as NASICON compound represent a big opportunity. Indeed, NASICON-type material with a typical chemical formula Li x M 2 (XO 4 ) 3 with X = Mo, W, P, S, about 1.04 mg cm − 2 calculated based on the mass average of 10 samples. Materials Characterization : The chemical composition and the morphology of the as-prepared material were determined by powder XRD (Burker D8 Advanced X-ray diffractometer), TG, and DTA on a STA449c/3/G (NETZSCH), BET surface area with Tristar II 3020 instrument, fi eld-emission SEM (JEOL7100F), and high-resolution TEM (JEM-2100F STEM/EDS), respectively. The electrochemical properties were carried out in a typical three-electrode cell using Autolab Potentiostat Galvanostat (Autolab PGSTAT 302N). The tests were conducted in alkaline electrolyte with as-synthesized materials on the 3D nickel foam as working electrode, Ag/KCl SCE, and Pt foil as reference and counter electrode, respectively. To further characterize the electrode materials, the electrochemical tests were performed in different alkaline electrolytes and the full cell was assembled with our synthesized material as cathode and RGO as anode.