Abstract:Tunable materials have been extensively studied due to their potential applications in many electrical devices. High tunability has been practically achieved in a number of ferroelectric materials such as perovskite phases under usually high DC electric field of 10–100 kV/cm. In this work, single phased M-type barium ferrite ceramics with colossal permittivity accompanied by defect pair dipoles and giant tunability under super low DC bias were successfully prepared by the sol-gel method. Results show that Zr4+ ions substituted for Fe3+ in the spinel phase of ferrites. The concentration of Fe2+ increased from 37.23% to 43.22% and subsequently decreased to 36.72% with increasing Zr4+ ions from 0 to 0.1 and then continuously to 0.3, respectively. The highest content of Fe2+ was ∼43.22% and thus the maximum concentration of Fe2+/Fe3+ pair dipoles formed between Fe2+ generated and Fe3+ nearby appeared in the ferrites with Zr4+ doping of 0.1. Not only in Zr4+ doped ferrites but also in the ferrites with doping other high valent ions, Fe2+/Fe3+ pair dipoles formed and controlled permittivity. Giant permittivity of above 30 k appeared in the ferrites with Zr4+ content of 0.1–0.3 and was controlled by external bias to form tunability. The activation energy of modulation of defect pair dipoles was only ∼0.182 eV, which is 85% lower than 1.2 eV of traditional perovskite BaTiO3. High dielectric tunability of more than 65% with only a low DC electric field of <25 V/cm was obtained in BaFe11.9Zr0.1O19 ferrites, which was in high contrast to conventional ferroelectrics where a high DC bias of dozens of kV/cm was required. Similarly, dielectric tunability of ∼40% with a low electric field of <40 V/cm was exhibited in Nb5+ or Ti4+ doped barium ferrites. Such a high tunability controlled by an extremely low bias field in barium ferrite ceramics doped by the target ions might be promised for novel applications in tunable devices.

Highly Tunable Multifunctional BaTiO3-Based Ferroelectrics via Site Selective Doping Strategy

Selectively Doped Barium Ferrite Ceramics with Giant Permittivity and High Tunability under Extremely Low Electric Bias

Large Electrostrain and High Optical Temperature Sensitivity in BaTiO3-(Na0.5Ho0.5)TiO3 Multifunctional Ferroelectric Ceramics

Doping-induced Polar Defects Improve the Electrocaloric Performance of Ba 0.9 Sr 0.1 Hf 0.1 Ti 0.9 O 3

Abnormal Curie Temperature Behavior and Enhanced Strain Property by Controlling Substitution Site of Ce Ions in Batio3 Ceramics

Doping-induced Polar Defects Improve the Electrocaloric Performance of Ba00.9Sr0.1Hf0.1Ti0.9O3

Electric-field-induced Local Distortion and Large Electrostrictive Effects in Lead-Free NBT-based Relaxor Ferroelectrics

Giant Electrocaloric Effect in Ferroelectric Ultrathin Films at Room Temperature Mediated by Flexoelectric Effect and Work Function

Large Electrocaloric Effect and Wide Working Area in the Transition from Ferroelectric to Nanodomains

Multi-element B-site substituted perovskite ferroelectrics exhibit enhanced electrocaloric effect

Giant electrostrictive effect in lead-free barium titanate-based ceramics via A-site ion-pairs engineering

Tuning the electrocaloric effect by tailoring phase fraction in BaTiO3-based ferroelectrics

Diffuse Phase Transitions and Giant Electrostrictive Coefficients in Lead-Free Fe3+-Doped 0.5Ba(Zr0.2Ti0.8)O3-0.5(Ba0.7Ca0.3)TiO3 Ferroelectric Ceramics

Electrocaloric Effect of (Ba1-Sr )(hf Ti1-)O3 Lead-Free Ferroelectric Ceramics with Phase Structure Regulation

Diffuse Phase Transitions and Giant Electrostrictive Coefficients in Lead-Free Fe3+-Doped 0.5Ba(zr0.2ti0.8)o-3-0.5(ba0.7ca0.3)tio3 Ferroelectric Ceramics

Manipulation of Curie temperature and ferroelectric polarization for large electrocaloric strength in BaTiO<sub>3</sub>-based ceramics

Wide Working Temperature Range and Large Electrocaloric Effect in BaTiO3 Based Ceramics Achieved by Regulating Phase Boundaries Through a Compensatory Ion Co-Doping Strategy

Tuning the ferroelectric transition and magnetic ordering by the polar Ba0.1Sr0.9TiO3 substitution in the multiferroic (1−x) Ba0.1Sr0.9TiO3 - xBiFeO3 (0.2 ≤ x ≤ 0.8) solid solution

Understanding the enhanced electrocaloric effect in BaTiO3-based ferroelectrics at critical state

A Strategy for Obtaining High Electrostrictive Properties and Its Application in Barium Stannate Titanate Lead-Free Ferroelectrics

Field-driven Merging of Polarizations and Enhanced Electrocaloric Effect in BaTiO3-based Lead-Free Ceramics