Abstract:Graphene quantum dots (GQDs) have received great interest in the past few years due to its unique properties such as the quantum confinement and edge effects when their sizes are down to 10 nm. These new physical properties can induce size-dependent bandgap, and unique optical and electronic properties, which make them excellent materials for photovoltaics and photoelectochemical (PEC) devices. In a dye-sensitized solar cell (DSSC), light harvesting capability of dyes could be enhanced by Förster resonance energy transfer (FRET) phenomena, wherein energy is transferred from an excited donor fluorophore to a suitable acceptor dye molecule. The strict requirement that the overlap of the emission spectrum of donor and absorption spectrum of acceptor, which also requires proper band edge alignment between the them, significantly limits the variety of donors and acceptors suitable for the FRET-based DSSCs. In our DSSC work, graphene quantum dots were co-sensitized with N719 dyes and we successfully explored that the GQDs is a suitable donor material for the N719 dyes. From the emission and time decay spectra analysis, the FRET efficiency was measured to be 27 %. The power conversion efficiency ( ƞ) of the standard DSSC is 6.12 % with a short-circuit current density ( J sc ) of 12.74 mAcm -2 and open-circuit voltage ( V oc ) of 760 mV. The co-sensitization of GQD greatly enhances the ƞ up to 7.96 % with a J sc of 16.54 mAcm -2 and V oc of 770 mV. The co-sensitization of GQDs improved both the J sc and ƞ values by ~ 30 %. The FRET enhanced the overall light absorption capacity of the N719 dye and hence photocurrent generation of the DSSC. Moreover, the co-sensitization of GQDs increase the TiO 2 /dye/electrolyte interface resistance, which suppresses the charge recombination and leads to increased V oc value. For PEC water splitting, higher light absorption can also be achieved by utilizing light-matter interplaymechanisms, such as, surface plasmon resonance (SPR), plasmonicresonance energy transfer (PRET) and exciton−plasmon interactions (EPI). The optical properties of the semiconductor and metal nanoparticles (SNPs-MNPs) are strongly modified via EPI comparing to single NPs. Therefore, we have utilized the unique combination of GQDs and AuNPs (SNPs-MNPs) to effectively enhance PEC performance of TiO 2 nanorods (TNRs). The AuNP-GQD decorated TNR photoelectrode has achieved a superior PEC performance with a photocurrent density of 1.75 mAcm -2 at 1.23 V vs RHE, which is one of higher value obtained in PEC measurement using TiO 2 nanorods due to an efficient utilization of solar light. The experimental analysis has indicated that the AuNPs has contributed to the PRET / SPR-mediated hot electron injection into TiO 2 and the GQDs contributed to the improved electron injection into the TiO 2 . Moreover, the significantly improved PEC water splitting efficiency is attributed to the synergistic effect due to EPI and/or FRET between AuNPs and GQDs in addition to the good catalytic property of the AuNPs and the GQDs.

Microwave-assisted ultrafast in-situ growth of N-doped carbon quantum dots on multiwalled carbon nanotubes as an efficient electrocatalyst for photovoltaics

Microwave Assisted Hydrothermal Way Towards Highly Crystalized N-Doped Carbon Quantum Dots and Their Oxygen Reduction Performance

Engineering Built‐In Electric Field Microenvironment of CQDs/g‐C3N4 Heterojunction for Efficient Photocatalytic CO2 Reduction

Synergistic Effect of Plasmonic Gold Nanoparticles Decorated Carbon Nanotubes in Quantum Dots/TiO2 for Optoelectronic Devices

Gradient heating-induced bi-phase synthesis of carbon quantum dots (CQDs) on graphene-coated carbon cloth for efficient photoelectrocatalysis

In Situ Growth of MoS2 Onto Co-Based MOF Derivatives Toward High-Efficiency Quantum Dot-Sensitized Solar Cells

In Situ Growth of MoS2 Onto Co-Based MOF Derivatives Toward High-Efficiency Quantum Dot-Sensitized Solar Cells.

Manipulation of Charge-Transfer Kinetics via Ti 3 C 2 T x ( T = −O) Quantum Dot and N-Doped Carbon Dot Coloading on CdS for Photocatalytic Hydrogen Production

A Nanocomposite of Carbon Quantum Dots and TiO2nanotube Arrays: Enhancing Photoelectrochemical and Photocatalytic Properties

Photoelectrochemical Conversion from Graphitic C3N4 Quantum Dot Decorated Semiconductor Nanowires

Ultrafine Transition Metal Phosphide Nanoparticles Semiembedded in Nitrogen-Doped Carbon Nanotubes for Efficient Counter Electrode Materials in Dye-Sensitized Solar Cells

Synthesis of N Doped Graphene Quantum Dots-Interspersed CdWO4 Heterostructure Nanorods As an Effective Photocatalyst with Enhanced Photoelectrochemical Performance

One-step synthesis of MOF-derived Cu@N-doped carbon composites as counter electrode catalysts for quantum dot-sensitized solar cells

Modulating In‐Plane Defective Density of Carbon Nanotubes by Graphitic Carbon Nitride Quantum Dots for Enhanced Triiodide Reduction

Carbon quantum dots induced one-dimensional ordered growth of single crystal TiO2 nanowires while boosting photoelectrochemistry properties

One-Pot Synthesis of Semiconducting Quantum Dots-Organic Linker-Carbon Nanotubes for Potential Applications in Bulk Heterojunction Solar Cells

Construction of 3D N-CQD/MOF-5 photocatalyst to improve the photocatalytic performance of MOF-5 by changing the electron transfer path

Synergism in carbon nanotubes and carbon-dots: counter electrode of a high-performance dye-sensitized solar cell

Modulating the Charge-Transfer Step of a p-n Heterojunction with Nitrogen-Doped Carbon: A Promising Strategy To Improve Photocatalytic Performance

(Invited) Light Absorption Enhancement Using Graphene Quantum Dots in Dye-Sensitized Solar Cells and Photoelectrochemical Water Splitting

Influence of ZnO/MWCNTs based hybrid electrodes for boosting the performance of photovoltaic and supercapacitor devices