Abstract:The combination of visual and inertial sensors for state estimation has recently found wide echo in the robotics community, especially in the aerial robotics field, due to the lightweight and complementary characteristics of the sensors data. However, most state estimation systems based on visual-inertial sensing suffer from severe processor requirements, which in many cases make them impractical. In this paper, we propose a simple, low-cost and high rate method for state estimation enabling autonomous flight of micro aerial vehicles, which presents a low computational burden. The proposed state estimator fuses observations from an inertial measurement unit, an optical flow smart camera and a time-of-flight range sensor. The smart camera provides optical flow measurements up to a rate of 200 Hz, avoiding the computational bottleneck to the main processor produced by all image processing requirements. To the best of our knowledge, this is the first example of extending the use of these smart cameras from hovering-like motions to odometry estimation, producing estimates that are usable during flight times of several minutes. In order to validate and defend the simplest algorithmic solution, we investigate the performances of two Kalman filters, in the extended and error-state flavors, alongside with a large number of algorithm modifications defended in earlier literature on visual-inertial odometry, showing that their impact on filter performance is minimal. To close the control loop, a non-linear controller operating in the special Euclidean group SE(3) is able to drive, based on the estimated vehicle’s state, a quadrotor platform in 3D space guaranteeing the asymptotic stability of 3D position and heading. All the estimation and control tasks are solved on board and in real time on a limited computational unit. The proposed approach is validated through simulations and experimental results, which include comparisons with ground-truth data provided by a motion capture system. For the benefit of the community, we make the source code public.

Model-aided and vision-based navigation for an aerial robot in real-time application

Navigation for fixed-wing unmanned aerial vehicles in the presence of GNSS outages

A Miniature Integrated Navigation System for Rotary-Wing Unmanned Aerial Vehicles

Indoor Integrated Navigation of Micro Aerial Vehicle Based on Radar-Scanner and Inertial Navigation System

Radar and Visual Odometry Integrated System Aided Navigation for UAVS in GNSS Denied Environment

Body-Centered Dynamically-Tuned Error-State Extended Kalman Filter for Visual Inertial Odometry in GNSS-Denied Environments

Differential GNSS and Vision-Based Tracking to Improve Navigation Performance in Cooperative Multi-UAV Systems

Adaptive UAV Navigation Method Based on AHRS

Mutual-Aided INS/Vision Navigation System Analysis and Optimization Using Sequential Filtering with State Recalculation

GNSS-Denied Semi Direct Visual Navigation for Autonomous UAVs Aided by PI-Inspired Inertial Priors

Navigation and control development for a four-wheel-steered mobile orchard robot using model-based design

An adaptive navigation method for a small unmanned aerial rotorcraft under complex environment

An Integrated Navigation Method Aided by Position Correction Model and Velocity Model for AUVs

A CBF-Adaptive Control Architecture for Visual Navigation for UAV in the Presence of Uncertainties

AIVIO: Closed-loop, Object-relative Navigation of UAVs with AI-aided Visual Inertial Odometry

An Integrated Navigation Method for Small-Sized AUV in Shallow-Sea Applications

An adaptive interactive multi-model navigation method based on UUV

UAV Active Perception and Motion Control for Improving Navigation Using Low-Cost Sensors

Autonomous navigation of micro aerial vehicles using high-rate and low-cost sensors

An Inertial-Based Integrated Navigation Robust Filtering Algorithm Based on Vehicle Model for GNSS Failure

A Novel Machine Learning-Based ANFIS Calibrated RISS/GNSS Integration for Improved Navigation in Urban Environments