Experimental modeling and optimization of pullulan production by Aureobasidium pullulans AZ-6

Gamze Nur Mujdeci,M. Tijen Bozdemir,Z. Yesim Ozbas

DOI: https://doi.org/10.1007/s00289-024-05146-8

IF: 2.843

2024-02-05

Polymer Bulletin

Abstract:The objective of this study was to optimize the fermentation parameters by using response surface methodology for increasing pullulan production of Aureobasidium pullulans AZ-6 in synthetic fermentation medium. The optimum conditions were determined as follows: the initial sucrose concentration ( X 1 ): 100 g/L; the initial peptone concentration ( X 2 ): 11.31 g/L; the initial pH ( X 3 ): 6.48; and the temperature ( X 4 ): 24.2 °C. In the optimum conditions, the maximum exopolysaccharide (EPS) concentration ( Y 1 ), the maximum pullulan concentration ( Y 2 ), the specific growth rate ( Y 3 ), the maximum specific pullulan formation rate ( Y 4 ), and the pullulan yield ( Y 5 ) were expected to be obtained as 37.078 and 35.372 g/L, 0.062 h −1 , 0.021 [g pullulan/(g mo.h)], and 53.681%, respectively. The observed values of Y 1 , Y 2 , Y 3 , Y 4 , and Y 5 were 36.950 g/L, 35.470 g/L, 0.064 h −1 , 0.036 [g pullulan/(g mo.sa)], and 54.480%, respectively, as a result of validation experiments. EPS samples were characterized by Fourier-transform infrared spectroscopy and scanning electron microscope analyses. The optimization process caused more than a 50% increase in EPS and pullulan concentrations. This study showed that the color-variant A. pullulans AZ-6 strain could become a significant industrial strain if it is explored further in the future to produce pullulan on a larger scale.

polymer science