Abstract:Previous research found that some organosilicon treatments proved effective in stabilizing waterlogged wood dimensions during drying. The present research aimed to determine the mechanism of wood stabilization by these chemicals to understand their mode of action. The study used chemically (ChP) and biologically degraded (BP) model Scots pine wood treated with Methyltrimethoxysilane (MTMS), (3-Mercaptopropyl) trimethoxysilane (MPTMS), or 1,3-Bis(diethylamino)-3-propoxypropanol)-1,1,3,3-tetramethyldisiloxane (DEAPTMDS). Synchrotron-based X-ray fluorescence microscopy (XFM) was used to investigate the penetration of organosilicons into the wood cellular structure and cell walls, and nanoindentation was used to study the mechanical properties of the treated wood cell walls. All treatments resulted in high volumetric anti-shrink efficiency (ASE V ) values of 74–82%, except for MTMS-treated ChP with an ASE V of 52%. The multiscale XFM results revealed that all applied organosilicons penetrated throughout the whole wooden blocks and deposited in both cell lumina and cell walls. The retention of all applied organosilicons was highest in BP wood, and so was the dimensional stabilization effect. MTMS-treated ChP had the lowest measured cell wall infiltration, which likely contributed to its lower ASE v . DEAPTMDS treatments plasticized the cell walls and resulted in lowered nanoindentation elastic modulus ( E s NI ) and hardness ( H ) for all types of wood. MTMS and MPTMS had modest effects on cell wall mechanical properties, and the effect depended on the type of wood. The final effect of organosilicon treatment on the dimensional wood stabilization and mechanical properties of wood cell walls depended not only on the type of the applied organosilicon but also the type of wood degradation. This means that the treatment cannot be considered universal, and specific approaches are needed for the conservation of individual wooden objects. Although some mechanisms are now better understood, such as the need for organosilicons to infiltrate the cell walls and the plasticizing effect of DEAPTMDS, other aspects will benefit from a more detailed analysis of the molecular interactions between organosilicons and wood polymers.

Nanocellulose-Based Films for Surface Protection of Wooden Artefacts

Synergistic Impact of Cellulose Nanocrystals with Multiple Resins on Thermal and Mechanical Behavior

Strength and Moisture-Related Properties of Filter Paper Coated with Nanocellulose

Sustainable cellulose nanofiber/hydrophobic silica nanoparticle coatings with robust hydrophobic and water-resistant properties for wood substrates

Anisotropic, Transparent Films with Aligned Cellulose Nanofibers

Development and evaluation of deacetylated konjac glucomannan based films incorporated with cellulose nanofibers and alumina nanoparticles

Lignin and Xylan as Interface Engineering Additives for Improved Environmental Durability of Sustainable Cellulose Nanopapers

Study on cellulose nanofibrils/copolymacrolactone based nano-composites with hydrophobic behaviour, self-healing ability and antioxidant activity

Cellulose nanofiber‐incorporated high‐solid siloxane acrylic latex by mini‐emulsion polymerization for hydrophobic coating and wood adhesive

Reducing Hydrophilicity of Cellulose Nanofibrils Through Lipase-Catalyzed Surface Engineering with Renewable Grafting Agents

Incorporation of Nano-Zinc Oxide as a Strategy to Improve the Barrier Properties of Biopolymer-Suberinic Acid Residues Films: A Preliminary Study

Performance study of a superhydrophobic nanocellulose membrane on the surface of a wood-based panel prepared via the sol-gel method

Nanocelluloses and Their Applications in Conservation and Restoration of Historical Documents

Surface modification of the cellulose nanocrystals through vinyl silane grafting

Application and characterization of a novel PVDF-HFP/PVP polymer composite with MoO3 nanowires as a protective coating for wood

Chemical, Biological and Mechanical Characterization of Wood Treated with Propolis Extract and Silicon Compounds

Conservation of model degraded pine wood with selected organosilicons studied by XFM and nanoindentation

Nanocellulose Grades with Different Morphologies and Surface Modification as Additives for Waterborne Epoxy Coatings

Influence of surface modification of wood with octadecyltrichlorosilane on its dimensional stability and resistance against Coniophora puteana and molds

Some Practical Aspects of Nanocellulose Film: Characterization, Expansion and Shrinking Tests, and Techniques to Create Remoistenable Nanocellulose

Wood inspired biobased nanocomposite films composed of xylans, lignosulfonates and cellulose nanofibers for active food packaging