Abstract:In order to expand the application of Zr-based bulk metallic glasses (BMGs) in the field of biomaterials, it is vital to investigate their corrosion behaviour in different solution environments. However, until now, the corrosion behaviour of Zr-based BMGs in F−-containing solution has been rarely studied, and the corrosion mechanism is not fully understood. In this study, the effect of pH and NaF addition on the corrosion behaviour of Zr52Al10Ni6Cu32 BMG in Na2SO4-containing solution has been investigated by employing the standard electrochemical methods. The relationship between the critical pF value and pH has been subsequently obtained, which provides a criterion for judging the state of corrosion of Zr-based BMGs in F−-containing solution. The cathodic reaction mainly involves the reduction of the dissolved oxygen in the solution, and the kinetic mechanism is similar to that of pure Zr. An oxidation peak appearing during the upward polarization scanning is attributed to the active dissolution of Cu caused by SO4 2− and F−. During upward polarization, different pH values and addition of NaF are observed to result in consequent film breakdown behaviour. For 0.1 M NaF and pH = 8.0, the protective ZrO2 passive film is noted to be replaced by the corrosion product of the Zr–F compound. However, at pH = 4.0 with 0.001 M NaF, the F− concentration is not sufficient to form the Zr–F corrosion products, and the dissolution rate of the passive film is enhanced due to the reduced pH. This study provides a deeper understanding of the corrosion mechanism of Zr-based BMGs alloys in F−-containing solution.

One-step rapid synthesis of a 3D porous surface on Zr-based bulk metallic glass

Investigations in the fabrication of surface patterns for wettability modification on a Zr-based bulk metallic glass by nanosecond laser surface texturing

Deep eutectic solvent-assisted synthesis of a 3D nanoporous surface on Zr-based amorphous alloy

In Vitro Cytocompatibility of a Zr-based Metallic Glass Modified by Laser Surface Texturing for Potential Implant Applications

Enhanced corrosion resistance of a ZrCuNiAl bulk metallic glass in simulated groundwater by minor crystallization

Additive Manufactured Large Zr-Based Bulk Metallic Glass Composites with Desired Deformation Ability and Corrosion Resistance

Effect of pH and NaF addition on corrosion of Zr-based bulk metallic glass in Na2SO4-containing solution

Improve plasticity of Zr-based metallic glass by surface treatment

Electrochemical surface nanostructuring of Ti47Cu38Fe2.5Zr7.5Sn2Si1Ag2 metallic glass for improved pitting corrosion resistance

Thermoplastic Forming of a Hydrophilic Surface with a Nanostructure Array on Zr-Cu-Ni-Al-Y Bulk Metallic Glass

Influence of powder characteristics on the structural and the mechanical properties of additively manufactured Zr-based bulk metallic glass

Femtosecond laser-induced transformation mechanism from 1D groove structure to 2D microholes structure on the surface of Zr-based metallic glasses

Structural design of additively manufactured porous Zr‐based bulk metallic glass

Preparation of Zr-based metallic glasses gradient composites with designable amorphous fraction by laser powder bed fusion

Surface Modification and Biocompatibility of Ni-free Zr-based Bulk Metallic Glass

Efficient preparation of multifunctional superhydrophobic surfaces on Zr-based bulk metallic glass by electrochemical machining

Characterization, mechanical properties and dimensional accuracy of a Zr-based bulk metallic glass manufactured via laser powder-bed fusion

Corrosion mechanisms of Zr-based bulk metallic glasses in NaBr solution

Anodic Dissolution Behavior of a Zr-based Bulk Metallic Glass and the Electrochemical Machining of Small Structures with High Geometrical Precision and Good Surface Quality

Effect of the alloy/mould contact on surface crystallisation of a biocompatible ZrCoAl bulk metallic glass

Bio-activation of Ni-free Zr-based bulk metallic glass by surface modification