Abstract:Reactor core components and structural materials of nuclear power plants to be decommissioned have been irradiated by neutrons of various intensities and spectrum. This long term irradiation results in the production of large number of radioactive isotopes that serve as a source of radioactivity for thousands of years for future. Decommissioning of a nuclear reactor is a costly program comprising of dismantling, demolishing of structures and waste classification for disposal applications. The estimate of radio-nuclides and radiation levels forms the essential part of the whole decommissioning program. It can help establishing guidelines for the waste classification, dismantling and demolishing activities. ORIGEN2 code has long been in use for computing radionuclide concentrations in reactor cores and near core materials for various burn-up-decay cycles, using one-group collapsed cross sections. Since ORIGEN2 assumes a constant flux and nuclide capture cross-sections in all regions of the core, uncertainty in its results could increase as region of interest goes away from the core. This uncertainty can be removed by using a Monte Carlo Code, like MCNP, for the correct calculations of flux and capture cross-sections inside the reactor core and in far core regions. MCNP has greater capability to model the reactor problems in much realistic way that is to incorporate geometrical, compositional and spectrum information. In this paper the classification of radioactive waste from the side structural components of a CANDU reactor is presented. MCNP model of full core was established because of asymmetric structure of the reactor. Side structural components of total length 240 cm and radius 16.122 cm were modeled as twelve (12) homogenized cells of 20 cm length each along the axial direction. The neutron flux and one-group collapsed cross-sections were calculated by MCNP simulation for each cell, and then those results were applied to ORIGEN2 simulation to estimate nuclide inventory in the wastes. After retrieving the radiation level of side structural components of in- and ex-core, the radioactive wastes were classified according to the international standards of waste classification. The wastes from first and second cell of the side structural components were found to exhibit characteristics of class C and Class B wastes respectively. However, the rest of the waste was found to have activity levels as that of Class A radio-active waste. The waste is therefore suitable for land disposal in accordance with the international standards of waste classification and disposal.

Analysis of the radioactivity in bio-shield of Kori NPP unit 1 via computational simulation

Development of scaling factors for the activated concrete of the KRR-2

Neutronic Characterization for a Pressurized Water Reactor Spent Fuel Assembly

Characterization of Radioactive Waste From Side Structural Components of a CANDU Reactor for Decommissioning Applications in Korea

Evaluation of Worker Radiation Exposure during the Kori Unit 1 Steam Generator Dismantling Process

Analysis of the Long-Term Interaction Between Molten Core and Dry Concrete at Fukushima Daiichi Unit 1

Shielding Capability Research on Composite Base Materials in Hybrid Neutron-Gamma Mixed Radiation Fields

A study on the dose evaluation of critical groups for unrestricted reuse of the site after the decommissioning of Kori Unit 1

Simulating Radiation Shielding Effectiveness Against Three Neutron Sources

Analysis of nuclear reactions and material damage on neutron absorbers using the HANARO research reactor

Preliminary study of the criticality monitoring method based on the simulation for the activity ratio of short half-life noble-gas fission products from fuel debris

An investigation of neutron shielding and activation performances of four types of concrete for carbon ion therapy facility

Sub-modeling numerical analysis on the radionuclide release from a transport cask submerged in the deep sea

Neutron Activation of Structural Materials of a Dry Storage System for Spent Nuclear Fuel and Implications for Radioactive Waste Management

Research on the Induced Radioactivity of HTR-PM’s Reactor Pressure Vessel: A Comparative Study Between FLUKA, KORIGEN and QAD-CGA

Human Intrusion Dose Assessment for the Safe Disposal of Radioactive Spent Resin Mixed Waste at Disposal Facilities

Study of a High Temperature–Resistant Shielding Material for the Shielding Doors of Nuclear Power Plants

Quantitative assessment of severe accident management strategies in a nuclear power plant

Assessment of the Usability of A Composite Containing Boron Carbide for Shielding the Gamma Rays

Monte carlo simulation of innovative neutron and photon shielding material composing of high density concrete, waste rubber, lead and boron carbide

Modelling of radiation field around spent fuel container