Abstract:A new dual-bandpass 180° hybrid coupler, based on four properly designed shorted-stub loaded stepped-impedance resonators, is proposed in this paper. In order to construct the collaboratively designed coupler/filter, the resonators are coupled magnetically and electrically with each other through three shorted stubs and an open coupled line, respectively. According to the approach of filter synthesis and the derived design equations, the characteristic admittances and electrical lengths of the resonators and coupling sections are determined to achieve the desired resonant frequencies, external Q factors, and internal coupling coefficients for dual passbands. A design procedure is provided. The design flexibilities for ratios of central frequencies and achievable bandwidths are explored. The component shows both filtering and power dividing functions within two specific passbands, whose good performances are demonstrated by the simulated and measured results. The two second-order passbands of a fabricated prototype are located at 2.42 and 5.84 GHz, with 4.6% and 5.2% bandwidths, respectively. The insertion losses are 1.0 and 1.4 dB over 3-dB power division. The isolations are better than 23.5 and 32.8 dB. In both the in-phase and out-of-phase responses, the in-band amplitude and phase imbalances are always within -1.6-0.6 dB and -6.5°-9.5°, respectively.

Low‐Cost Low‐Loss Tunable Dual‐Band Filter Using Coupled Lines With Variable Coupling Coefficients

Substrate Integrated Waveguide Filter with Flat Passband Based on Complex Couplings

Collaborative Design of a New Dual-Bandpass 180 Hybrid Coupler

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Miniaturized Dual-Band Substrate Integrated Waveguide Filter with Controllable Bandwidths

Broadband Filter Based on Stub-Loaded Ridge Substrate Integrated Waveguide (SIW) in Low Temperature Cofired Ceramic (LTCC)

A Dual-Band Coupled-Line Coupler with an Arbitrary Coupling Coefficient

A Substrate-Integrated Evanescent-Mode Waveguide Filter with Nonresonating Node in Low-Temperature Co-Fired Ceramic

A multilayer dual-band coupler based on composite right/left-handed folded substrate integrated waveguide

A Novel Ltcc Multilayer Siw Linear Phase Filter

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Novel FR4‐based low loss reconfigurable filter with four operating modes using movable transmission lines

Dual-band bandpass filter using centrally coupled resonators (CCRs)

Low Loss Tunable Superconducting Dual-Mode Filter at L-Band Using Semiconductor Varactors

High-order Dual-Band Superconducting Filter with Independently Controllable Passbands and Wide Stopband

Substrate Integrated Waveguide Filter With Flexible Mixed Coupling

Dual-Band Substrate Integrated Waveguide Filter With Independent TE$_{101}$ and TE$_{102}$ Coupling

A Compact Dual‐band Superconducting Filter with Fine‐tuning Coupling Structure

Miniaturized Ultra-Narrowband Superconducting Microstrip Filter with Stable Coupling Using Optimized Twin Spiral-In-Spiral-Out Resonators

Ultra-Low-Loss Millimeter-Wave LTCC Bandpass Filters Based on Flexible Design of Lumped and Distributed Circuits.

Compact high-selectivity tunable dual-mode filter with constant bandwidth by adopting frequency-dependent S-L coupling