Abstract:Purpose This study aims to investigate the design and optimization of landing gear buffers to improve the landing-phase comfort of civil aircraft. Design/methodology/approach The vibration comfort during the landing and taxiing phases is calculated and evaluated based on the flight-testing data for a type of civil aircraft. The calculation and evaluation are under the guidance of the vibration comfort standard of GB/T13441.1-2007 and related files. The authors establish here a rigid-flexible coupled multibody dynamics finite element model of one full-size aircraft. Furthermore, the authors also implement a dynamic simulation for the landing and taxiing processes. Also, an analysis of how the main parameters of the buffers affect the vibration comfort is presented. Finally, the optimization of the single-chamber and double-chamber buffers in the landing gear is performed considering vibration comfort. Findings The double-chamber buffer with optimized parameters in landing gear can improve the vibration comfort of the aircraft during the landing and taxiing phases. Moreover, the comfort index can be increased by 25.6% more than that of a single-chamber type. Originality/value To the best of the authors’ knowledge, this study first investigates the evaluation methods and evaluation indexes on the aircraft vibration comfort, then further conducts the optimization of the parameters of landing gear buffer with different structures, so as to improve the comfort of aircraft passengers during landing process. Most of the current studies on aircraft landing gear have focused on the strength and safety of the landing gear, with very limited research on cabin vibration comfort during landing and subsequent taxiing because of the coupling of runway surface unevenness and airframe vibration.

Adaptive observer-based integral event-triggered antivibration control of a full aircraft active landing gear system with irregular runway excitations

Parameter-dependent Vibration-Attenuation Controller Design for Electro-Hydraulic Actuated Linear Structural Systems

Observer Based Optimal Vibration Control of a Full Aircraft System Having Active Landing Gears and Biodynamic Pilot Model

Observer based fault diagnosis of aircraft active landing gear system

Fuzzy pid control for landing gear based on magneto-rheological (MR) Damper

Shimmy vibration analysis of unmanned aircraft coupled with landing gears

Design of Thrust Vectoring Vertical/Short Takeoff and Landing Aircraft Stability Augmentation Controller Based on L1 Adaptive Control Law

Research on Anti-Rollover Adaptive Landing Gear Technology Based on Impedance Control

Automatic landing system design via multivariable model reference adaptive control

Design, structure analysis and shock control of aircraft landing gear system with MR damper

Adaptive and quasi-sliding control of shimmy in landing gears

Intelligent Control Based on a Neural Network for Aircraft Landing Gear with a Magnetorheological Damper in Different Landing Scenarios

Aeroservoelastic model based active control for large civil aircraft

Optimization of landing gear under consideration of vibration comfort for civil aircraft

Vibration analysis and control of aircraft landing systems using proposed neural controllers

Brake-Induced Landing Gear Walk Vibration Analysis and Suppression Method Research

LQR-based Ground Resonance Suppression of Helicopter with Adaptive Landing Gear

Shock Absorber Leakage Impact on Aircraft Lateral Stability During Ground Handling Maneuvers

Revised adaptive active disturbance rejection sliding mode control strategy for vertical stability of active hydro-pneumatic suspension

Calculation of the Passenger Aircraft Landing Gear Shock Absorption System Exposed to Impact Loading

Design and dynamic analysis of landing gear system in vertical takeoff and vertical landing reusable launch vehicle