Abstract:The multifunctional interface of Sn‐MXene with high zincophilic and hydrophobic properties is rationally designed via a one‐step strategy with a novel molten salt etching to achieve dendrite‐free Zn deposition. Experimental results and theoretical calculations reveal that stable and reversible Zn plating/stripping is achieved for the Zn anode coated by the Sn‐MXene, which delivers an extended cycling life. The practical application of aqueous Zn‐metal anodes (AZMAs) is mainly impeded by the short cycling life and unsatisfactory reversibility springing from the notorious Zn dendrite growth and detrimental water‐induced parasitic reactions at anode‐electrolyte interface. To tackle these challenges, a multifunctional interface of Sn‐modified Ti3C2Cl2 MXene (denoted as Sn‐MXene) with high zincophilic and hydrophobic properties is rationally designed via a 1‐step strategy with a novel molten salt etching to achieve dendrite‐free Zn deposition. Experimental results and theoretical calculations reveal that the Sn nanoparticles can induce a strongly zincophilic surface with high Zn2+ adsorption, and the Ti3C2Cl2 MXene significantly decreases the surface energy of the Zn (002) plane, guiding the zinc‐preferred orientation along the (002) plane in the electroplating growth process. Moreover, the hydrophobic properties of ‐Cl terminations of the protective interface for the Zn anode can regulate Zn‐ion solvation structure to mitigate H2O‐decomposition‐induced side reactions, and guarantee a steady stream of Zn2+ flux. Encouragingly, benefiting from the Sn‐MXene layer, a side reaction‐free and dendrite‐free Zn anode with an excellent lifespan is achieved, which is further applied as an anode for full battery (Sn‐MXene‐Zn//α‐MnO2) with a long‐term span over 800 cycles under 1 A g–1 with a capacity retention of 96%.

An In‐Depth Study of Regulable Zincophilic Alloy Matrix toward Stable Zinc Metal Batteries

A Homogeneous Plating/stripping Mode with Fine Grains for Highly Reversible Zn Anodes

A Seamless Metal-Organic Framework Interphase with Boosted Zn2+Flux and Deposition Kinetics for Long-Living Rechargeable Zn Batteries

Ordered Planar Plating/stripping Enables Deep Cycling Zinc Metal Batteries

Stabilizing Zn Metal Anode by Interfacial Self-Assembled Zincophilic Metal-Organic Complex Conversion Layers

Alloying strategy to stabilize monocrystalline zinc anode under high utilization and working capacity

3D zincophilic micro-scaffold enables stable Zn deposition

Intrinsic structural optimization of zinc anode with uniform second phase for stable zinc metal batteries

Zincophilic and Low-Active Metallic Particles-Induced Alloying/dealloying Behavior for High-Performance Aqueous Zinc Metal Batteries

Lithiation Induced Hetero‐superlattice Zn/ZnLi As Stable Anode for Aqueous Zinc‐ion Batteries

Regulated Ion/Electron-Conducting Interphase Enables Stable Zinc-Metal Anodes for Aqueous Zinc-Ions Batteries

In situ growing 3D-Cu coating to improve the reversibility and reaction kinetics of Zn metal anodes

Ultra‐Stable Zinc Metal Anodes Enabled by Uniform Zn Deposition on A Preferential Crystal Plane

A New Insight into Ultrastable Zn Metal Batteries Enabled by In Situ Built Multifunctional Metallic Interphase

Zinc-tin Binary Alloy Interphase for Zinc Metal Batteries

Regulating Zinc Nucleation Sites and Electric Field Distribution to Achieve High-Performance Zinc Metal Anode via Surface Texturing.

Enabling and Boosting Preferential Epitaxial Zinc Growth via Multi‐Interface Regulation for Stable and Dendrite‐Free Zinc Metal Batteries

Alloying Strategy for High-Performance Zinc Metal Anodes

Controllable synthesis of an atomic Sn-anchoring carbon host for excellent long-cycle-life zinc metal batteries

A three-dimensional zincophilic nano-copper host enables dendrite-free and anode-free Zn batteries

Manipulating alloying reaction to achieve the stable and dendrite-free zinc metal anodes