Abstract:Abstract This paper presents 3D Fabry–Pérot (FP) cavities fabricated directly onto cleaved ends of low-loss optical fibers by a two-photon polymerization (2PP) process. This fabrication technique is quick, simple, and inexpensive compared to planar microfabrication processes, which enables rapid prototyping and the ability to adapt to new requirements. These devices also utilize true 3D design freedom, facilitating the realization of microscale optical elements with challenging geometries. Three different device types were fabricated and evaluated: an unreleased single-cavity device, a released dual-cavity device, and a released hemispherical mirror dual-cavity device. Each iteration improved the quality of the FP cavity’s reflection spectrum. The unreleased device demonstrated an extinction ratio around 1.90, the released device achieved 61, and the hemispherical device achieved 253, providing a strong signal to observe changes in the free spectral range of the device’s reflection response. The reflectance of the photopolymer was also estimated to be between 0.2 and 0.3 over the spectrum of interest. The dual-cavity devices include both an open cavity, which can interact with an interstitial medium, and a second solid cavity, which provides a static reference reflection. The hemispherical dual-cavity device further improves the quality of the reflection signal with a more consistent resonance, and reduced sensitivity to misalignment. These advanced features, which are very challenging to realize with traditional planar microfabrication techniques, are fabricated in a single patterning step. The usability of these FP cavities as thermal radiation sensors with excellent linear response and sensitivity over a broad range of temperature is reported. The 3D structuring capability the 2PP process has enabled the creation of a suspended FP heat sensor that exhibited linear response over the temperature range of 20 oC –120 oC; temperature sensitivity of ∼50 pm oC −1 at around 1550 nm wavelength; and sensitivity improvement of better than 9x of the solidly-mounted sensors.

3D printing specialty multi-function twin core Bi/Er co-doped silica optical fibres for ultra-broadband polarized near infrared emission and sensing applications

Mid-infrared dual-cladding photonic crystal fiber with high birefringence and high nonlinearity

All Solid Photonic Crystal Fiber Enabled by 3D Printing Fiber Technology for Sensing of Multiple Parameters

Stable Broadband Fiber-Coupled Near Infrared Light Sources Based on a Bismuth Heavily Doped Aluminosilicate Optical Fiber

Three-dimensional Fabry–Pérot cavities sculpted on fiber tips using a multiphoton polymerization process

Er3+/Yb3+ Co-Doped Fluorotellurite Glass Fiber with Broadband Luminescence

Ultra‐Broadband Emission in Bi/Ge Co‐Doped Silica Glass and Fiber via Bismuth Coordination Engineering

3D Laser Engineering of Molten Core Optical Fibers: Toward a New Generation of Harsh Environment Sensing Devices

Ultra‐broadband and Thermally Stable NIR Emission in Bi‐doped Glasses and Fibers Enabled by a Metal Reduction Strategy

Hollow‐Micropillared Glass Fabricated on Hollow Joe Pye Weed‐Inspired Tubes for Detecting Molecular Signatures

Toward an ultra-broadband emission source based on the bismuth and erbium co-doped optical fiber and a single 830nm laser diode pump.

A novel multicore Er/Yb co-doped microstructured optical fiber amplifier with peanut-shaped air holes cladding

Applications and Development of Multi-Core Optical Fibers

Bandwidth extension to 1627 nm of over 20 dB gain in an erbium-doped silica fiber via two-photon absorption

Broadband 2.7 μm amplified spontaneous emission of Er 3+ doped tellurite fibers for mid-infrared laser applications

Mid-IR Hollow-core microstructured fiber drawn from a 3D printed PETG preform

Novel Er3+/Ho3+‐codoped Glass‐ceramic Fibers for Broadband Tunable Mid‐infrared Fiber Lasers

Reel-to-Reel Fabrication of In-Fiber Low-Loss and High-Temperature Stable Rayleigh Scattering Centers for Distributed Sensing

Control of temperature dependent viscosity for manufacturing of Bi-doped active fiber

Ultra-Broad Near-Infrared Emission of Bi-Doped Sio2-Al2o3-Geo2 Optical Fibers

Dual Self-Growing Polymer Microtips on A Multicore Fiber for Humidity and Temperature Discriminative Sensing