Abstract:Titanium and titanium alloys are key basic support materials in the field of engineering technology and high technology, and are widely used in the fields of natural gas transportation, chemical corrosion, and marine development. Titanium alloy ingots are often prepared with more solidification defects such as surface cracks and cold shuts, resulting in lower utilization of titanium metal and higher cost of titanium products. The root of this is the lack of in-depth knowledge of the ingot melting and casting process, and the failure to control the thermal conditions of the billet in the molding process within a reasonable range. In this study, based on the Lagrange Euler algorithm, combined with ProCAST finite element software to establish a numerical model, revealing the solid-liquid interface morphology, the length of the transition region, and the change rule of thermal stress under the influence of different process parameters in the solidification process of titanium slab ingot. The results show that with the increase in pulling speed, the depth of the solid-liquid phase line and the width of the mushy zone of slab ingot increase, and the length of the transition region grows. With the increase in casting temperature, the depth of the solid-liquid phase line of the slab ingot decreases, and the mushy zone gradually becomes narrower. The casting temperature and pulling speed are positively correlated with the value of the thermal stress equivalent stress in slab ingots, and the probability of cracks in the corners and ingot surface is higher. This study provides effective theoretical guidance for the realization of stable mass production of high-quality titanium slab ingot.

A Simulation Method for Predicting Shrinkage Cavity and Cracking Tendency in Waspaloy Vacuum Induction Melting Ingot

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Integrated simulation method and experimental validation for the vacuum induction melting process

Integrated Numerical Simulations and Experimental Measurements for the Sintering Process of Injection-Molded Ti-6Al-4V Alloy

Continuous Casting Mould for Square Steel Billet Optimised by Solidification Shrinkage Simulation

Numerical Simulation of Central Shrinkage Crack Formation in a 234-T Steel Ingot

Simulating Study on the Shrinkage Cavity and Porosity of a Microalloyed Steel Ingot

Determination of casting parameters of thick wall die-casting of magnesium alloy and simulation of its processing

Three-dimensional Simulation of Solidification Process in Large Steel Ingot

Molten pool flow behavior and influencing factors in electron beam selective melting of IN738 superalloy

Experimental study and numerical simulation of solidification in large steel ingot

Numerical simulation of shrinkage cavity formation in spheroidal graphite iron castings based on micro modeling

Multiphase Model for the Prediction of Shrinkage Cavity, Inclusion and Macrosegregation in a 36-Ton Steel Ingot

Simulation of Temperature Field and Microstructure in Heavy Steel Ingots Solidification

Numerical simulation study on solidification process of titanium slab ingot by electron beam cold hearth melting

Numerical Simulation for the Investment Casting Process of a Large-Size Titanium Alloy Thin-Wall Casing

Multiphysics modeling and experimental validation of heat and mass transfer for the vacuum induction melting process

Numerical Simulation and Optimization of Investment Casting for Complex Thin-walled Castings

Modelling of shrinkage cavity defects during the wheel and belt casting process

Numerical simulation and experimental study of vacuum arc remelting (VAR) process for large-size GH4742 superalloy

Numerical Simulation of Influence of Vertical Continuous Casting Process Parameters on Heat Transfer and Mold Stress of C71500 Large Diameter Hollow Ingot