Abstract:Utilizing catalysts to accelerate the redox kinetics of lithium polysulfides (LiPSs) is a promising strategy to alleviate the shuttle effect of lithium-sulfur (Li-S) batteries. Nevertheless, most of the reported catalysts are only effective for LiPSs reduction, resulting in the devitalization of catalysts over extended cycles as a consequence of the continuous accumulation of Li2S passivation layer. The situation gets even worse when employing mono-directional catalyst with poor electron conductivity because the charge transfer for the decomposition of solid Li2S is severely hampered. Herein, a high-conductive and dual-directional catalyst Co3C decorated on porous nitrogen-doped graphene-like structure and carbon nanotube (Co3C@PNGr-CNT) is fabricated as sulfur host, which not only promotes the precipitation of Li2S from LiPSs during discharge but also facilitates the decomposition of Li2S during subsequent charge, as evidenced by the reduced activation energies for both reduction and oxidation processes. Furthermore, the long-term catalytic stability of Co3C is corroborated by the reversible evolution of Co-C bond length over extended cycles as observed from X-ray absorption fine structure results. As a consequence, the fabricated Co3C@PNGr-CNT/S cathode delivers a low capacity decay of 0.043% per cycle over 1000 cycles at 2C. Even at high sulfur loading (15.6 mg cm(-2)) and low electrolyte/sulfur (E/S) ratio (similar to 8 mu L mg(-1)) conditions, the battery still delivers an outstanding areal capacity of 11.05 mAh cm(-2) after 40 cycles. This work provides a rational strategy for designing high-efficient bidirectional catalyst with single component for high-performance Li-S batteries. (C) 2021 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.

Steering bidirectional polysulfide conversion in virtue of interface microenvironment of Ni/porous carbon Mott-Schottky heterojunctions

A Nitrogen/Oxygen Dual-Doped Porous Carbon with High Catalytic Conversion Ability Toward Polysulfides for Advanced Lithium–Sulfur Batteries

Bimetallic Nanoparticles Decorated Porous Carbon As the Host Material to Enhance the Performance of Lithium-Sulfur Batteries

Coupling highly dispersed Sb2S3 nanodots with nitrogen/sulfur dual-doped porous carbon nanosheets for efficient immobilization and catalysis of polysulfides conversion

Activating redox kinetics of polysulfides within edge-rich nitrogen doped porous interconnected carbon nanosphere

A bi-functional catalyst strategy to selectively regulate sulfur redox kinetics in lithium-sulfur batteries

Direct trapping and rapid conversing of polysulfides via a multifunctional Nb<sub>2</sub>O<sub>5</sub>-CNT catalytic layer for high performance lithium-sulfur batteries

Leveraging doping strategies and interface engineering to enhance catalytic transformation of lithium polysulfides for high-performance lithium-sulfur batteries

Multifunctional transitional metal-based phosphide nanoparticles towards improved polysulfide confinement and redox kinetics for highly stable lithium-sulfur batteries

Bidirectionally Catalytic Polysulfide Conversion by High-Conductive Metal Carbides for Lithium-Sulfur Batteries

A Ni/Ni2P Heterostructure in Modified Porous Carbon Separator for Boosting Polysulfide Catalytic Conversion

Facilitation polysulfides adsorption/catalysis by nitrogen/phosphorous co-doped carbon nanofibers networks for advanced lithium/polysulfides batteries

Catalytic-conversion behavior of MoS2 for polysulfides by nickel introduction and phosphorous-doping in advanced lithium-sulfur batteries

Multifunctional reaction interfaces for capture and boost conversion of polysulfide in lithium-sulfur batteries

A hollow Co0.12Ni1.88S2/NiO heterostructure that synergistically facilitates lithium polysulfide adsorption and conversion for lithium-sulfur batteries

Niobium Diboride Nanoparticles Accelerating Polysulfide Conversion and Directing Li2S Nucleation Enabled High Areal Capacity Lithium-Sulfur Batteries

A Conductive Framework Embedded with Cobalt-Doped Vanadium Nitride As an Efficient Polysulfide Adsorber and Convertor for Advanced Lithium-Sulfur Batteries

Design Multifunctional Catalytic Interface: Toward Regulation of Polysulfide and Li2 S Redox Conversion in Li-S Batteries.

Bidirectional redox catalyst with rambutan-like structure for advanced lithium-sulfur battery

Synergistic effect of porous carbon shell confinement and catalytic conversion of nickel nanoparticle cores for improved lithium-sulfur batteries

Synergistic Action of Pt and Nb2O5 Ultrafine Nanoparticles for Bidirectional Conversion of Polysulfides in High-Performance Lithium-Sulfur Cells