Abstract:Metal/CFRP hybrid thin-walled structures combine low-density and high-strength carbon fibre reinforced plastics (CFRP) with low-cost and stable failure form aluminium, which have drawn increasing attention in the transportation industry. A theoretical model was developed to predict the average crushing force of a hybrid multicell under axial compression. The model captures the main energy dissipation mechanism of the hybrid tube under axial compression, and the average crushing force is determined by a quasi-static compression test. The obtained results show that the average crushing force predicted by the theoretical model is in good agreement with the experimental results. However, the geometry size and configuration of multicell thin-walled structures have important effects on crashworthiness. Therefore, it is necessary to study the parametrization of hybrid multicell tubes. First, the simulation model of the multicell tube is established, and quasi-static experiments verify its accuracy. Second, finite element analysis was used to compare the effects of the geometric size of the cell and the multicell structure of different configurations on the energy absorption characteristics. It is clear that with the increase in the thickness of the large aluminium tube, the specific energy absorption ( SEA ) and crush force efficiency ( CFE ) both show an upward trend. In addition, with the increase in the ply number of the CFRP tubes, the SEA also shows a minor monotonic increasing trend. Finally, various hybrid tubes with different configurations are designed, and the C-C 4 -AL tube (the aluminium tube surrounded by four small-size CFRP tubes being placed inside a CFRP tube.) configuration has the most significant energy absorption ( EA ) and peak crushing force ( PCF ).

Crashworthiness of hierarchical multi-cell circular tubes

The axial crushing performance of bio-inspired hierarchical multi-cell hexagonal tubes

Numerical simulation and theoretical analysis of the crashworthiness of a tree-like hierarchical multicellular bi-tube

Crashworthiness properties of square hierarchical multicellular tube under axial impact

On the crashworthiness of bio-inspired hexagonal prismatic tubes under axial compression

On crashing behaviors of bio-inspired hybrid multi-cell Al/CFRP hierarchical tube under quasi-static loading: An experimental study

Design of hierarchical multi-cell double circular tubes thin-walled structures for energy absorption

On the crashworthiness of novel right-angle fractal gradient hierarchical multi-cell bi-tubular tubes under axial loading

Crashworthiness Analysis of Self-Similar Nested Hierarchical Hexagonal Tubes

Crashworthiness design and enhanced energy absorption of multi-cell thin-walled circular tubes

Crashworthiness analysis of double-corrugated multicellular tubes under axial impact

Design and Crashworthiness Analysis of Thin-Walled Tubes Based on a Shrimp Chela Structure

Quasi-static Axial Crushing and Transverse Bending of Double Hat Shaped CFRP Tubes

Axial crushing and energy absorption of graded hierarchical hexagonal tubes

Crushing analysis of square gradient hierarchical multicellular tubes

Study on the crashworthiness of bio-inspired multi-cell tube under axial impact

Energy-absorbing characteristics of hollow-cylindrical hierarchical honeycomb composite tubes under conditions of dynamic crushing

Crashworthiness design of bionic-shell thin-walled tube under axial impact

Experimental and numerical investigation of crashworthiness of multicell metal/CFRP tubes

Energy Absorption Characteristic of Biomimetic Gradient Hierarchical Multicellular Tubes Under Axial Impact

Crashworthiness Characteristics of Bio-inspired 3D-Printed Tubes: A Lesson from the Environment