Abstract:The performance of air-source heat pump is strongly influenced by ambient temperature variation. Improving its stability and efficiency during wintertime is important for promoting its applications, while existing studies paid few attentions to flexible parameter regulation of heat pump using mixture. In this paper, a single-stage compound air-source heat pump using ternary mixture was theoretically simulated and experimentally tested, in which operating parameters including pressure and concentration could be regulated with the cooperation of multiple valves and reservoirs. Using CO2/R134a/R600, operating pressure and mixture concentration were successfully regulated at ambient temperature from -30 & DEG;C to 0 & DEG;C, achieving a coefficient of performance from 1.834 to 2.546 when producing hot water at 75 & DEG;C. Whether R134a inclusion was favorable to energy performance depended on its influence on the temperature matching in recuperative process, especially the heat transfer process in recuperator. The addition of R134a significantly alleviated the increase of operating pressure and thus enlarged the operation range of this heat pump. The flammability range of CO2/R134a/R600 was calculated, indicating the insignificant influence of R134a on flammability retardance in the studied range of this paper. The significance of this study is further revealed with the potential advances of heat transfer technique and new-generation refrigerant. The findings in this paper contribute to: 1) the modification of air-source heat pump for operation at low temperature; 2) the regulation method for mixed-refrigerant system; 3) the exploration of new mixed-refrigerant in thermodynamic cycle.

Study on the temperature adaptability of free-piston Stirling heat pump

A 2 kW-class free-piston Stirling heat pump prototype suitable for cold regions for domestic heating

Numerical study on a multi-unit heat-driven double-acting free-piston Stirling heat pump system

Performance Investigation on a Novel Air-Source Heat Pump Using CO2/HC for Recirculated Water Heater in Cold Regions

Experimental Investigations on the Performance of a Single-Stage Compound Air-Source Heat Pump Using CO2/R600a in Cold Regions

Simulation Study on Thermal Performance of Solar Coupled Air Source Heat Pump System with Phase Change Heat Storage in Cold Regions

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

Study on Efficient Heating Method by Solar Coupled Air Source Heat Pump System with Phase Change Heat Storage in Severe Cold Region

Experimental Investigation on Storage-Type Heat Pump System for Efficient Supply in Cold Region

A hybrid H2O/IL absorption and CO2 compression air-source heat pump for ultra-low ambient temperatures

The Study of Dynamic Characteristics on a Novel Air Source Heat Pump Coupled with Liquid-Storage Gas-Liquid Separator under Non Frosting and Refrigeration Conditions

Performance optimization of high-temperature heat pump system for staged heating under large temperature span

Performance Investigation of a Transcritical CO2 Heat Pump Combined with the Terminal of Radiator and Floor Radiant Coil for Space Heating in Different Climates, China

Development and Performance Evaluation of CO2 Automotive Heat Pump System Applied to-20 ℃ Environment

Study of operation characteristics of air-source heat pump for cold regions

Experimental and numerical study on a heat-driven direct-coupled Stirling refrigerator

Climate Adaptivity and Field Test of the Space Heating Used Air-Source Transcritical CO2Heat Pump

Theoretical analysis of a direct-coupled Stirling combined cooling and power system for heat recovery

Experimental Study on a Ground Source Heat Pump System in Cold Area

Performance improvement of vapor-injection heat pump system by employing PVT collector/evaporator for residential heating in cold climate region

Numerical investigation on a heat-driven free-piston thermoacoustic-Stirling refrigeration system with a unique configuration for recovering low-to-medium grade waste heat