Abstract:Abstract The behaviour of concrete in fire depends on its mix proportions and constituents and is determined by complex physicochemical transformations during heating. Normal‐strength concretes and high‐performance concretes microstructurally follow similar trends when heated, but ultra‐high‐performance concrete behaves differently. A key property unique to concrete amongst structural materials is transient creep. Any structural analysis of heated concrete that ignores transient creep will yield erroneous results, particularly for columns exposed to fire. Failure of structural concrete in fire varies according to the nature of the fire; the loading system and the type of structure. Failure could occur from loss of bending or tensile strength; loss of bond strength; loss of shear or torsional strength; loss of compressive strength; and spalling of the concrete. The structural element should, therefore, be designed to fulfil its separating and/or load‐bearing function without failure for the required period of time in a given fire scenario. Design for fire resistance aims to ensure overall dimensions of the section of an element sufficient to keep the heat transfer through this element within acceptable limits, and an average concrete cover to the reinforcement sufficient to keep the temperature of the reinforcement below critical values long enough for the required fire resistance period to be attained. The prediction of spalling – hitherto an imprecise empirical exercise – is now becoming possible with the development of thermohydromechanical nonlinear finite element models capable of predicting pore pressures. The risk of explosive spalling in fire increases with decrease in concrete permeability and could be eliminated by the appropriate inclusion of polypropylene fibres in the mix and/or by protecting the exposed concrete surface with a thermal barrier. There are three methods of assessment of fire resistance: (a) fire testing; (b) prescriptive methods, which are rigid; and (c) performance‐based methods, which are flexible. Performance‐based methods can be classified into three categories of increasing sophistication and complexity: (a) simplified calculations based on limit state analysis; (b) thermomechanical finite element analysis; and (c) comprehensive thermohydromechanical finite element analysis. It is only now that performance‐based methods are being accepted in an increasing number of countries.

A close look at fire-induced explosive spalling of ultra-high performance concrete: from materials to structures

Fire Performance of Fiber-reinforced Ultra-High-Performance Concrete: A State-of-the-art Review

Effect of Lateral Restraint and Inclusion of Polypropylene and Steel Fibers on Spalling Behavior, Pore Pressure, and Thermal Stress in Ultra-High-performance Concrete (UHPC) at Elevated Temperature

Strategy for preventing explosive spalling and enhancing material efficiency of lightweight ultra high-performance concrete

Experimental Research on the Degradation of Mechanical Properties and Microstructural Evolution of Ultra-High-Performance Concrete Under Fire Conditions

Synergistic Effects of Hybrid Polypropylene and Steel Fibers on Explosive Spalling Prevention of Ultra-High Performance Concrete at Elevated Temperature

A comprehensive review of ultra-high performance concrete (UHPC) behaviour under blast loads

A numerical study of blast resistance of fire damaged ultra-high performance concrete columns

Lead spall velocity of fragments of ultra-high-performance concrete slabs under partially embedded cylindrical charge-induced explosion

Modeling the Fire Response of Reactive Powder Concrete Beams with Due Consideration to Explosive Spalling

Effect of Aggregate Size and Inclusion of Polypropylene and Steel Fibers on Explosive Spalling and Pore Pressure in Ultra-High-performance Concrete (UHPC) at Elevated Temperature

Spalling Resistance of Fiber-Reinforced Ultra-High-Strength Concrete Subjected to the ISO-834 Standard Fire Curve: Effects of Thermal Strain and Water Vapor Pressure

Numerical Investigation of Fire-Induced Spalling of Normal Strength Concrete

Fire Resistance of Ultra-High Performance Concrete Columns Subjected to Axial and Eccentric Loading

Pore pressure build-up and explosive spalling in concrete at elevated temperature: A review

Effect of fire on concrete and concrete structures

Fire performance of ultra-high performance concrete: effect of fine aggregate size and fibers

Experimental assessment of explosive spalling in normal weight concrete panels under high intensity thermal exposure

Physical, Mechanical, and Microstructure Characteristics of Ultra-High-Performance Concrete Containing Lightweight Aggregates

Influence of High Temperatures on the Mechanical and Microstructural Properties of Hybrid Steel-Basalt Fibers Based Ultra-High-performance Concrete (UHPC)

The Role of Calcium Aluminate Cement in Developing an Efficient Ultra-High Performance Concrete Resistant to Explosive Spalling under High Temperatures