Pre-oxidation coupled with ceramic membrane filtration for natural organic matter removal and membrane fouling mitigation during surface water treatment
Keying Li,Yong Wei,Ming Kong,Ziyin Guo,Zhengbo Luo,Xianjian Li,Rongkai Shi
DOI: https://doi.org/10.5004/dwt.2023.29809
IF: 1.1
2023-01-01
Desalination and Water Treatment
Abstract:Catalytic ozonation coupled with membrane filtration has been widely used in water treatment to improve effluent quality as well as control membrane fouling. In this study, the removal of natural organic matter (NOM) from surface water and the mitigation of membrane fouling by O3/H2O2/TiO2 pre-oxidation coupled with ceramic membrane in static cycling model were investigated. The results showed that the pre-oxidation of O3, O3/H2O2 and O3/TiO2 significantly improved the removal rate of NOM, with the sequence of O3/TiO2 > O3/H2O2 > O3. Under the O3/TiO2 pre-oxidation, the macromolecular substances such as aromatic proteins, fulvic acid-like and humic-like substances were completely removed, which may be due to the accelerated ozonolysis and •OH formation by TiO2. Meanwhile, three-dimensional fluorescence spectra and molecular weight distribution showed that humic acids and biopolymers were the main pollutants, and also the main causes for membrane fouling. The pre-oxidation of O3, O3/H2O2 and O3/TiO2 significantly mitigated the membrane fouling via the degradation of humic acids and biopolymers with the order of O3/TiO2 > O3/H2O2 > O3. Under the optimal pretreatment, the resistance of membrane fouling was significantly reduced, and the transmembrane pressure (TMP) decreased by 62.2%. Redundancy analysis showed that the molecular weight was the most important factor for total fouling resistance, while turbidity was negatively correlated with the fouling resistance. In addition, the O3/H2O2/TiO2 pretreatment can also enhance NOM removal and membrane fouling mitigation under long-term (48 h) cycle model.
engineering, chemical,water resources