Abstract:Anchors have been widely utilized to reinforce the CRTS II slab tracks. The mechanical performance of the tracks in the reinforced-unreinforced transition zone exposed to extreme heat waves can be very complex due to the difference in mechanical properties between the two kinds of track segments. This paper investigates the damage behavior of the tracks in the reinforced-unreinforced transition zone in extreme heat events. A finite element model of the CRTS II slab track in the transition zone has been established and validated, in which the nonlinear mechanical properties of track materials and interfaces are considered by applying the Concrete Damaged Plasticity model and the Cohesive Zone Model respectively. The nonlinear temperature field in the track structure in extreme heat events is applied to the model. Structural damage of the track, including slab-end arching and interfacial failure, in the transition zone under extreme heat is thoroughly investigated. In particular, the effects of joint use of post-installed reinforcement anchors and other track maintenance measures like interface adhesives and concrete joint restoration are studied. The following conclusions are drawn: (1) The more reinforced track-slabs in the transition zone, the milder the track diseases including slab-end arching and interfacial gapping. (2) Joint use of anchor installation and other maintenance measures such as interface adhesives and concrete joint restoration shows a better effect on mitigating track damage than using post-installed reinforcement anchors solely. (3) Concrete joint restoration overweighs interface adhesives in terms of reducing slab-end arching and interfacial damage when they are jointly used with post-installed reinforcement anchors. (4) In the transition zone, track damage surges when the air temperature increases from 42 ℃ to 47 ℃, which is the temperature range for an extreme heat wave. Monitoring of track state in the transition zones is necessary during extreme heat waves. The novel findings are expected to provide some insights into the mechanical performance of slab tracks and help to prevent potential damage to the tracks in the transition zone, which is a common and practical issue in railway engineering.

Effects of metal–ceramic anticorrosion coating on the performance of ballastless tracks at high temperature

Influence of Reflective Coating on Temperature Field and Temperature Effect of CRTS III Slab Ballastless Tracks on Bridges

Interfacial failure and arching of the CRTS II slab track reinforced by post-installed reinforcement bars due to thermal effects

Thermal deformation and interfacial separation of a CRTS II slab ballastless track multilayer structure used in high-speed railways based on meteorological data

Influences of cyclic air temperature and solar radiation on the long-term deterioration behaviour of double-block ballastless track

Mechanical Performance of a Ballastless Track System for the Railway Bridges of High-Speed Lines: Experimental and Numerical Study under Thermal Loading

Mechanical performance of CRTS II slab tracks in reinforced-unreinforced transition zone in extreme heat events

Investigation on Interface Damage between Cement Concrete Base Plate and Asphalt Concrete Waterproofing Layer under Temperature Load in Ballastless Track

The Effect of Annealing on Microstructure and High Temperature Erosion Property of Arc-Spraying Coatings Containing Nanosized Ceramic Powders

Study on the performance of lightweight roadway wall thermal insulation coating containing EP-GHB mixed ceramsite

Effect of intrinsic thermal cycles on the microstructure and mechanical properties of heat affect zones in laser cladding coatings on full-scale rails

Corrosion of rail tracks and their protection

Design and Experimental Evaluation of Composite Magnesium Phosphate Cement-Based Coating with High Cooling Effect

Recent Development in Advance Ceramic Materials and Understanding the Mechanisms of Thermal Barrier Coatings Degradation

Analytical study on geometrical irregularity and internal loads of railways with CRTS I ballastless tracks on arch bridges subject to thermal effects

Influence of track line environment on the temperature field of a double-block ballastless track slab

Mechanical Characteristics and Failure Mode of Asphalt Concrete for Ballastless Track Substructure Based on In Situ Tests

Research on Interface Modification and Thermal Insulation/Anticorrosive Properties of Vacuum Ceramic Bead Coating

Temperature effects on noise radiated by concrete railway structures

Ballistic Performance of Aluminum Alloy Plates with Polyurea Coatings for High-Speed Train Structures

Effect of Cladding Fe-Based Coating on the Microstructure, Wear Resistance, and Dynamic Performance of CL60 Steel