Abstract:Global warming is arguably the biggest scientific challenge of the twenty-first century and its environmental consequences are already noticeable. To mitigate the emissions of greenhouse gases, particularly of CO2, there is an urgent need to design materials with improved adsorbent properties. Five different magnetic ionic liquids were impregnated into the metal–organic framework ZIF-8. The composites were produced by a direct-contact method, and their performance as sorbents for gas separation applications was studied. The impact of the ionic liquid anion on the sorption capacity and ideal CO2/CH4 and CO2/N2 selectivities were studied, focusing on understanding the influence of metal atom and ligand on the adsorbent properties. Reproducible methodology, along with rigorous characterization, were established to assess the impact of the ionic liquid on the performance of the composite materials. Results show that the ionic liquid was well-impregnated, and the ZIF-8 structure was maintained after ionic liquid impregnation. The produced composites were of microporous nature and were thermally stable. CO2, CH4, and N2 adsorption–desorption isotherms were obtained at 303 K and between 0 and 16 bar. The adsorption-desorption data of the composites were compared with that obtained for original ZIF-8. The general trend in composites is that the increased gas uptake per available pore volume compensates the pore volume loss. Adsorption data per unit mass showed that composites have reversible sorption, but inferior gas uptake at all pressure ranges. This is due to the observed total pore volume loss by the ionic liquid pore occupation/blockage. In most cases, composites showed superior selectivity performance at all pressure range. In particular, the composite [C4MIM]2[MnCl4]@ZIF-8 shows a different low-pressure selectivity trend from the original MOF, with a 33% increase in the CO2/N2 selectivity at 1 bar and 19% increase in the CO2/CH4 selectivity at 10 bar. This material shows potential for use in a post-combustion CO2 capture application that can contribute to greenhouse gas mitigation.

Highly-Controlled Soft-Templating Synthesis of Hollow ZIF-8 Nanospheres for Selective CO 2 Separation and Storage

Anion Pillared Metal–Organic Framework Embedded with Molecular Rotors for Size-Selective Capture of CO2 from CH4 and N2

Efficient CO2 Capture by ZIF-8-derived In-Situ Nitrogen-Doped Nanoporous Carbon with Ultra-High Selectivity and Stability

Green Synthesis of MOF-801(Zr/Ce/Hf) for CO 2 /N 2 and CO 2 /CH 4 Separation

A Series of Functionalized Zirconium Metal–Organic Cages for Efficient CO 2 /N 2 Separation

Facile Synthesis of MOF-5-derived Porous Carbon with Adjustable Pore Size for CO2 Capture

Selective Gas Adsorption and Separation of Carbon Dioxide in Metal-organic Frameworks and Composites

Ultraefficient Conversion of CO2 into Morphology-Controlled Nanocarbons: A Sustainable Strategy Toward Greenhouse Gas Utilization

A highly stable metal- and nitrogen-doped nanocomposite derived from Zn/Ni-ZIF-8 capable of CO2 capture and separation.

Optimized Pore Nanospace through the Construction of a Cagelike Metal-Organic Framework for CO 2 /N 2 Separation

Seeds-assisted synthesis of Zr-based metal-organic framework (MIP-202) for efficient adsorption separation of CO2/CH4 and CO2/N2

Development of efficient CO 2 adsorbents: Synthesis and performance evaluation of dopamine-modified halloysite nanotubes loaded with ZIF-8

Porous Calcium‐Silicate‐Hydrate as a Low‐Cost Nano‐Platform for Ultra‐High CO2 Capture and Storage

Paramagnetic Ionic Liquid/Metal Organic Framework Composites for CO2/CH4 and CO2/N2 Separations

Carbon dioxide capture-related gas adsorption and separation in metal-organic frameworks

Synthesis of ultramicroporous zeolitic imidazolate framework ZIF-8 via solid state method using a minimum amount of deionized water for high greenhouse gas adsorption: A computational modeling

Nanoconfinement-driven energy-efficient CO2 capture and release at high pressures on a unique large-pore mesoporous carbon

Research progress on MOFs for CO2 separation and capture

Enhanced stability and hydrophobicity of LiX@ZIF-8 composite synthesized environmental friendly for CO2 capture in highly humid flue gas

PEG-templated synthesis of ultramicroporous n-ZIF-67 nanoparticles with high selectivity for the adsorption and uptake of CO2 over CH4 and N2