Abstract:Ice-strengthened ships inevitably suffer from ice floe impacts during navigation in icy regions. Under some extreme-ice-impact loadings, the ship structure will experience plastic deformations. The magnitude of plastic deformation is highly correlated with the ice floe-impact energy level. During most ice impacts, only the ship's plate undergoes minor plastic deformation. Considering that the structure still has a high structural strength with a minor permanent deformation, developing a structural plastic design method for polar ships has become a hot research issue in current studies. Therefore, in this paper, based on the rigid-plastic theory and the ice-crushing-energy approach, an experimentally verified theoretical model for predicting plastic deformations of the vertical-side plate of polar ship subjected to ice floe impacts was established. According to the analytical solutions of the plastic deformation, the plastic design formula to determine the plating thickness of ice-strengthened ships subjected to ice floe impacts was further derived based on the plastic design criteria. In addition, the parameter analysis of ice strength described by the ice pressure–area relationship, allowable-permanent-set parameter, impact energy and ice shape were conducted, and plating-thickness design curves with different design parameters were given. The design of plating thickness is very sensitive to the determinations of the allowable-permanent set and ice pressure–area curves. The designed plating thickness decreased with the increase of the allowable-permanent set. Moreover, a comparative analysis of the designed plating thickness for ice floe impact and rigid-mass impact was also carried out. Under the same impact conditions, due to energy absorption caused by ice damage, the designed thickness of the plate for rigid-mass impact was much larger than that for the ice impact. It is necessary to consider the impact-induced ice damage and energy dissipation in a structural design, instead of using rigid impact loads for conservative design. The research in this paper can provide some useful references for the structural design of ice-strengthened ships subject to ice floe impacts.

A tri-axial ice model for simulating ice-stiffened panel impact: Experiments and numerical modeling

Investigation of ice wedge bearing capacity based on an anisotropic beam analogy

Validation of a Temperature-Gradient-dependent Elastic-Plastic Material Model of Ice with Finite Element Simulations

Validating Material Models and Yield Criteria for Prediction of Impact Pressure

A Finite Element Method to Simulate Ice Based on Multi-Surface Failure Criterion

Research on ship-ice collision model and ship-bow fatigue failure mechanism based on elastic-plastic ice constitutive relation

Numerical Simulation of Ship Collision with Rafted Ice Based on Cohesive Element Method

Numerical Simulation Study on the Ice Load and Ship Motion Response in Formation Navigation in Brash Ice Channels

Numerical Simulations of the Sliding Impact Between an Ice Floe and a Ship Hull Structure in ABAQUS

A Multi-Yield-Surface Plasticity State-Based Peridynamics Model and its Applications to Simulations of Ice-Structure Interactions

Numerical study on dynamic icebreaking process of an icebreaker by ordinary state-based peridynamics and continuous contact detection algorithm

Investigating Load Calculation for Broken Ice and Cylindrical Structures Using the Discrete Element Method

Numerical investigation of ice plate fractures upon rigid ball impact

A Numerical Method to Simulate Ice Drift Reversal for Moored Ships in Level Ice

Numerical Simulation of a Polar Ship Moving in Level Ice Based on a One-Way Coupling Method

Numerical Study of Flat Plate Impact on Water Using a Compressible CIP–IBM–Based Model

Numerical Investigations of the Ice Force Distributions on a Ship in Brash Ice Channel Using a Simplified Cfd-Dem Solving Framework

Experimental Investigation of Ice Loads on Structures during Quasi-Static Compression Tests

A New Plastic Design Approach for the Vertical-Side-Plating Thickness of Ice-Strengthened Ships Suffering from Ice Floe Impacts

Numerical simulation on an icebreaking vessel with fixed drift angles in level ice

Numerical simulation of impact process between spherical ice and a rigid plate based on the ordinary state-based peridynamics