Abstract:The gradual increase of CO2 concentration in the atmosphere is believed to have a profound impact on the global climate and environment. To address this issue, strategies toward effective CO2 conversion have been CO2 developed. As one of the most available strategies, the CO2 electrochemical reduction approach is particularly attractive because the required energy can be supplied from renewable sources such as solar energy. Electrochemical reduction NNC of CO2 to chemical feedstocks offers a promising strategy for mitigating CO2 emissions from anthropogenic activities; however, a critical challenge for this approach is to develop effective electrocatalysts with ultrahigh activity and selectivity. Herein, we report the facile synthesis of a highly efficient and stable atomically isolated nickel catalyst supported by ultrathin nitrogenated carbon nanosheets (Ni-N-C) for CO2 reduction through pyrolysis of Ni-doped metal-organic frameworks (MOFs) and dicyandiamide (DCDA). MOFs are crystalline and assembled by metal-containing nodes and organic linkers, which have a large specific surface area, tunable pore size and porosity, and highly dispersed unsaturated metal centers. Thus, Ni-doped MOFs were chosen as the precursors to endow Ni-N-C with a porous carbon structure and nickel ions. The nitrogen in Ni-N-C came from DCDA, which acts as the active site to anchor nickel ions. Because of the porous structure and numerous nitrogen sites, the Ni content of Ni-N-C was as high as 7.77% (w). There were two types of nickel ion-containing structures, including Nit-N-C and Ni2+-N-C. The structure transformation of the Nit-N-C species from the initial Ni2+ (Ni-MOF) was achieved by pyrolysis, and the ratio of Ni+ and Ni2+ varied with the pyrolysis temperature. Compared to other Ni-N-C prepared at other temperatures, Ni-N-C-800 contained more Nit-N-C species that possessed the optimum *CO binding energy and thus boosted the CO desorption and evolution rate, thereby exhibiting higher CO Faradaic efficiency (FE) up to 94.6% at -0.9 V (vs. the reversible hydrogen electrode, RHE) in 0.1 moI L-1 KHCO3. In addition, it has been found that the rate of CO formation on the Ni-N-C-800 electrode relies on the electrolyte concentration. With the optimal electrolyte concentration, the Ni-N-C-800 electrode achieved a superior Faraday efficiency of > 90% for CO over a wide potential range of -0.77 to -1.07 V (vs. RHE) and displayed a CO FE as high as 97.9% with a current density of 12.6 mA cm(-2) at -0.77 V (vs. RHE) in 0.5 mol.L-1 KHCO3. After testing at -0.77 V for 12 h, the Ni-N-C-800 electrode maintained a CO FE of approximately 95%, indicating superior long-term stability. We believe that this study will contribute to the design and synthesis of highly catalytically active atomically dispersed monovalent metal sites for metal-N-C catalysts.

S-Doped Ni II -Triazolate Derived Ni–S–C Catalyst for Electrochemical CO 2 Reduction to CO

Sulfur‐Decorated Ni−N−C Catalyst for Electrocatalytic CO2 Reduction with Near 100 % CO Selectivity

Advanced Ni-Nx-C Single-Site Catalysts for CO2 Electroreduction to CO Based on Hierarchical Carbon Nanocages and S-doping

Sulfur-doped unsaturated Ni-N<sub>3</sub> coordination for efficient electroreduction of CO<sub>2</sub>

Highly Stable and Electron-Rich Ni Single Atom Catalyst for Directed Electroreduction of Co2 to Co

Ultrathin Nitrogenated Carbon Nanosheets with Single-Atom Nickel As an Efficient Catalyst for Electrochemical CO2 Reduction

One-step Synthesis of N-doped Carbon Nanotubes-Encapsulated Ni Nanoparticles for Efficient Electrochemical CO2 Reduction to CO

Highly stable and electron-rich Ni single atom catalyst for directed electroreduction of CO 2 to CO

Facile Synthesis of Single-Nickel-atomic Dispersed N-doped Carbon Framework for Efficient Electrochemical CO2 Reduction

Atomically Dispersed NiN 3 Sites on Highly Defective Micro‐Mesoporous Carbon for Superior CO 2 Electroreduction

Atomic-Dispersed Coordinated Unsaturated Nickel–Nitrogen Sites in Hollow Carbon Spheres for the Efficient Electrochemical CO 2 Reduction

Atomically Dispersed Ni-N-C Catalyst Derived from NiZn Layered Double Hydroxides for Efficient Electrochemical CO2 Reduction

One-Step Chemical Vapor Deposition Synthesis of Hierarchical Ni and N Co-Doped Carbon Nanosheet/Nanotube Hybrids for Efficient Electrochemical CO2 Reduction at Commercially Viable Current Densities

Nitrogen‐Doped Carbon‐Encapsulated Nickel Nanoparticle Catalysts Using Covalent Organic Frameworks As Templates for Electrochemical CO2 Conversion

Facile Synthesis of N-doping Carbon-Encapsulated Metal Catalyst for CO2 Electroreduction to CO

Atomic Zn‐Doping Induced Sabatier Optimum in NiZn0.03 Catalyst for CO2 Electroreduction at Industrial‐Level Current Densities

Molecular Engineering of Porous Fe-N-C Catalyst with Sulfur Incorporation for Boosting CO2 Reduction and Zn-CO2 Battery

Highly coordinated Ni-N 5 sites for efficient electrocatalytic CO 2 reduction toward CO with faradaic efficiency exceeding 99%

The Structure–activity Correlation of Single-Site Ni Catalysts Dispersed Onto Porous Carbon Spheres Toward Electrochemical CO2 Reduction

Facile synthesis of single-nickel-atomic dispersed mesoporous carbon nanosheets with controllable nitrogen doping for efficient electrochemical CO<sub>2</sub> reduction

Three-dimensional Ordered Porous N-doped Carbon-Supported Accessible Ni-Nx Active Sites for Efficient CO2 Electroreduction