Abstract:A multiscale scheme on the bending performance of injection molded products. The characterization of the flexural performances of short glass fiber reinforced polyether‐ether‐ketone (SGFR‐PEEK) composites fabricated by injection molding is a crucial and challenging task due to the process‐induced fiber orientation at different locations, resulting layered shell‐core‐shell microstructures and exhibiting large variations in mechanical performances. This article proposes a method for predicting the bending performance of SGFR‐PEEK and indicates the influence of fiber orientation on its bending behavior. This article reports a new scheme that combines multiscale homogenization with periodic microstructures and presents an experimental investigation of the flexural properties of SGFR‐PEEK composites. The distributions of fiber orientation through the thickness extracted from the micro‐computed tomography (μCT) were analyzed and reproduced with a layered skin‐shell‐core structure along the thickness at meso‐scale finite element model within representative volume elements (RVEs) of the macroscopic composites. Then, the effective properties of the RVEs were predicted using the homogenization method with the periodic boundary condition. The elastic modulus of skin‐shell‐core layers in the direction of flow are 4260.51, 4541.27, 4628.52, and 4630.84 MPa, respectively. The classical laminate theory (CLT) and the second homogenization implementation were then utilized in conjunction with the obtained mechanical properties of RVEs to predict the effective macrostructural behavior. The flexural modulus of the composite material was determined to be 5448.7 MPa through a three‐point bending test. The results obtained through lamination plate reinforcement theory and finite element simulation were 5887.4 and 5785.9 MPa, respectively, showing good agreement with the experimental findings. It is shown that the proposed multiscale scheme yields satisfactory agreement with experimental measurements. In addition, the effect of layered skin‐shell‐core microstructures on the flexural behavior was discussed. Highlights RVEs of layered shell‐core‐shell microstructures were generated with specified fiber orientations. The homogenization scheme with the periodic boundary condition was adopted to accurately predict each layer mechanical properties. The proposed multiscale scheme was compared with experimental results and yielded satisfactory predictions. The effect of layered skin‐shell‐core microstructures on the flexural behavior was thoroughly studied by the multiscale analytical approach.

Effects of periodic sequential arrangement of subscale miura-foldcore under quasi-static compression

Quasi-static compression response of foldcore sandwich structure based on core evolution

Influence of Fiber Cutting at the Composite Grid Intersection on the Compressive Performance of Laminate

Numerical investigation of the effects of chopped carbon fiber bundle dimensions on properties of sheet molding compound

The energy absorption capacity of a novel dual-sub-fold Miura foldcore subjected to axial crushing

Experiment and mesoscopic modelling on the dynamic compressive behaviors of a new carbon fiber-reinforced cement-based composite

Transverse energy absorption performance of sandwich tubes with various origami foldcores

Compression Mechanics for Carbon-Fiberreinforced Epoxy Resin Composites Under Inplane and Out-Of-Plane Quasi-Static and Dynamic Loadings

Enhanced Estimation of Axial Compressive Strength for CFRP Based on Microscale Numerical Simulation and the Response Surface Method

Role of material directionality on the mechanical response of Miura-Ori composite structures

Optimization of geometrical factors for enhanced performance of carbon fiber reinforced polymer cores under transverse loading

Micromechanical modeling of longitudinal compression behavior and failure mechanism of unidirectional carbon fiber reinforced aluminum composites involving initial fiber misalignment

Micromechanical modeling for longitudinal tensile property of unidirectional CFRP considering dispersion of fiber properties

Compressive Strength Determined for Ultrahigh Modulus Fiber Reinforced Composites by [90/0]ns Laminates

Comprehensive inter-fibre failure analysis and failure criteria comparison for composite materials using micromechanical modelling under biaxial loading

A multiscale scheme for homogenization to characterize the flexural performances of injection molded short glass fiber reinforced polyether ether ketone composites

Multiscale analysis method and experiments for the transverse mechanical property of unidirectional fiber-reinforced composites

Research on compression properties of unidirectional carbon fiber reinforced epoxy resin composite (UCFREP)

Manufacturing and Testing of a CFRC Sandwich Cylinder with Kagome Cores

Micromechanical modeling of discontinuous long fiber reinforced composites

Experimental and theoretical investigation on tensile properties and fracture behavior of carbon fiber composite laminates with varied ply thickness