Abstract:Programmable active bandpass filters (BPFs) have been designed in a chip-scale heterogeneous integration technology, which intimately integrates InP HBTs on a deep scaled CMOS technology. Therefore, the active BPF can leverage both high performance of InP HBT and high density and programmability of CMOS. Two BPF prototypes, consisting of a programmable gain amplifier (PGA), a fifth- or third-order BPF core, and a buffer, have been designed and fabricated. The BPF center frequency can be switched from 0.8 to 2.2 GHz with 150-MHz passband and delivers > 55-dB out-of-band (OOB) rejection for the fifth-order one. Four gain steps: 0, 6, 12, and 16 dB, are enabled by the front PGA to trade off noise and linearity performances. Due to the > 300-GHz f T of InP HBTs, the BPF cores can leverage active-RC architecture for high linearity owing to the close-loop implementation. The fifth-order BPF prototype occupies a 1.5 × 1.02 mm2 area together with pads and draws 106/121 mA from a 3.3-V power supply for 0.8/2.2-GHz bands, respectively, which demonstrates OOB output third-order intercept points (OIP3s) of 22.69/21.25 dBm for 0.8/2.2-GHz bands at the high gain mode. The measurement results suggest the fifth-order BPF core achieves 36.69/35.25-dBm OOB OIP3s. In addition, the designed third-order programmable BPF has been successfully used as a technology yield vehicle to assist the BiCMOS technology development.

An integrated tunable wideband RF filter in SiP technology

A 0.8/2.4 GHz Tunable Active Band Pass Filter in InP/Si BiCMOS Technology

3D Heterogenous Integrated Wideband Switchable Bandpass Filter Bank for Millimeter Wave Applications

A 1.3–1.7-Ghz $Q$ -Enhanced Resonator-Based High-IF Bandpass Filter with 1.5%–67% Tunable Fractional Bandwidth in 65-Nm CMOS Process

Design of a Miniaturized Dual-Band Double-Folded Substrate Integrated Waveguide Bandpass Filter with Controllable Bandwidths

Miniaturized Dual-Band Substrate Integrated Waveguide Filter with Controllable Bandwidths

0.8/2.2-GHz Programmable Active Bandpass Filters in InP/Si BiCMOS Technology

Substrate-Integrated Waveguide Bandpass Filters with Planar Resonators for System-on-Package

A CMOS 1.3-1.7GHz Q-Enhanced LC Band-pass RF Filter with 1.5-67% Tunable Fractional Bandwidth

Broadband Filter Based on Stub-Loaded Ridge Substrate Integrated Waveguide (SIW) in Low Temperature Cofired Ceramic (LTCC)

A 5th order 0.8/2.4 GHz programmable active band pass filter for power DAC applications

Miniaturized and High-Selectivity Substrate Integrated Waveguide (SIW) Bandpass Filter Loaded by Complementary Split-Ring Resonators (Csrrs)

A Dual-Band Filter Using Stepped-Impedance Resonator (SIR) Embedded into Substrate Integrated Waveguide (SIW)

A miniaturized and low-loss Q-band SIW bandpass filter based on evanescent-mode in wafer-level packaging process

Design of a Novel SiP Integrated RF Front-End Module Based on SOI Switch and SAW Filter

Compact Dual‐layer Substrate‐integrated Waveguide Bandpass Filters with Controllable Transmission Zeros

Design and Implementation of a Dual-Band RF SiP Module Based on Package-on-Package Technology

Integrated Broadband Filter with Sharp Transition Edges Based on SiN and SiON Composite Waveguide Coupler

A Novel Symmetrical Folding Miniaturized Substrate Integrated Waveguide Tunable Bandpass Filter

Narrowband SIW-SSPP Hybrid Bandpass Filter With Compact Profile at Ka-Band