Abstract:We have attempted to apply the computer-based finite element analysis (FEA) method to accurately measure the mechanical properties (e.g., hardness and elasticity) of a soft material by an indentation test. First, an axisymmetric model has been developed using commercially available FEA code ANSYS. The FEA model consisted of a thin Al-film resting on Si-substrate. A spherical indenter has been used to indent the Al-film, which traveled a predefined depth during the loading and unloading cycles. First, numerical simulations were conducted to get the force vs. displacement plot, which was later used to determine the modulus of elasticity and hardness of Al-film. The effects of substrate modulus and indentation depth were thoroughly investigated to determine the modulus and hardness of Al-film. The effect of friction, considered at the interface of indenter and Al-film, was found to offer minimum impact for relatively small indentation depth. The induced force on the Al-film by the indenter has been found to be higher with increasing indentation depth when friction was considered. However the contact stiffness, represented by the slope of the unloading curve, has been found almost the same with and without considering friction. The variation of substrate modulus has been found to be ineffective to capture the Al-film modulus for relatively small indentation depth. However for higher indentation depth, the substrate modulus has been found to offer profound effect to capture the film modulus. The hardness of the Al-film has also been found to be relatively unaffected with variation of substrate modulus. However, the hardness of the Al-film has been found to be higher with friction for relatively high indentation depth. Results obtained from this preliminary research are important to continue further investigation and to characterize the mechanical properties of other soft-materials, e.g., biofilms to minimize its detrimental effects and utilize its favorable aspects in industrial and biomedical applications.

Parameter Estimation of a Nonlinear Burgers Model using Nanoindentation and Finite Element-based Inverse Analysis

Multiscale Simulation Of Wedge Nanoindentation Based On The Repulsive Force-Field Approach

Material model calibration through indentation test and stochastic inverse analysis

Mechanical characterization of soft viscoelastic gels via indentation and optimization-based inverse finite element analysis

Ogden Material Calibration via Magnetic Resonance Cartography, Parameter Sensitivity, and Variational System Identification

AI-dente: an open machine learning based tool to interpret nano-indentation data of soft tissues and materials

Probabilistic Estimation of Mechanical Properties of Biomaterials Using Atomic Force Microscopy

Macro-indentation testing of soft biological materials and assessment of hyper-elastic material models from inverse finite element analysis

Critical Review of Nanoindentation-Based Numerical Methods for Evaluating Elastoplastic Material Properties

Analysis of the Nanoindentation Data Measured with a Berkovich Indenter for Brittle Materials: Effect of the Residual Contact Stress

Identification of Elastoplastic Constitutive Model of GaN Thin Films Using Instrumented Nanoindentation and Machine Learning Technique

Numerical investigation of mechanical properties of aluminum-copper alloys at nanoscale

Determining the constitutive behavior of nonlinear visco-elastic-plastic PMMA thin films using nanoindentation and finite element simulation

Bayesian changepoint analysis for atomic force microscopy and soft material indentation

Embedding an ANN-Based Crystal Plasticity Model into the Finite Element Framework using an ABAQUS User-Material Subroutine

Nano-Indentation for Characterizing Mechanical Properties of Soft Materials

Application of the Johnson-Cook plasticity model in the finite element simulations of the nanoindentation of the cortical bone.

Deep learning based nanoindentation method for evaluating mechanical properties of polymers

Inverse Method to Determine Parameters for Time-Dependent and Cyclic Plastic Material Behavior from Instrumented Indentation Tests

Strain hardening-softening oscillations induced by nanoindentation in bulk solids

Description of the Nanoindentation Unloading Curves with a Universal Function: Theoretical Consideration and Applications to Brittle Materials