Measuring Dam Deformation of Long-Distance Water Transfer Using Multi-Temporal Synthetic Aperture Radar Interferometry: A Case Study in South-to-North Water Diversion Project, China

Ruya Xiao,Xiaoyuan Gao,Xun Wang,Shanshui Yuan,Zhou Wu,Xiufeng He

DOI: https://doi.org/10.3390/rs16020365

IF: 5

2024-01-17

Remote Sensing

Abstract:Long-distance water transfer is a critical engineering measure to rectify disparities in water resource distribution across regions. The effective operation and safety of such projects are paramount to their success, as localized issues can have cascading consequences, potentially disrupting the entire network. Conventional ground-based monitoring methods have limitations in measuring the deformation of large-scale structures. In this paper, InSAR is employed to monitor the deformation of the Shuangwangcheng (SWC) Reservoir, which features a long embankment dam as part of the South-to-North Water Diversion Project in China. We utilize data from both Sentinel-1 and TerraSAR-X satellites to derive 7-year deformation. Results reveal that the entire dam experiences continuous subsidence, with the maximum deformation in the line-of-sight direction measuring ~160 mm. While minor differential settlements are noted in different sections of the dam, the gradient is not significant due to the dam's substantial length. The InSAR deformation results from multiple geometries demonstrate good consistency, with the highest correlation observed between the Sentinel-1 ascending and descending datasets, exceeding 0.9. Validation against the GNSS observations of the three sites on the SWC Dam shows the accuracy of InSAR displacements is ~8 mm. Water level changes do impact deformation, but consolidation settlement appears to be the primary controlling factor during the monitoring period. This study underscores the potential of InSAR in long-distance water transfer projects and highlights that spatially continuous deformation is the most significant advantage.

environmental sciences,imaging science & photographic technology,remote sensing,geosciences, multidisciplinary

What problem does this paper attempt to address?

The main problem that this paper attempts to solve is the problem of reservoir dam deformation monitoring in long - distance water transfer projects. Specifically, the paper focuses on the dam deformation monitoring of the Shuangwangcheng (SWC) reservoir in the East Route Project of China's South - to - North Water Transfer. Traditional ground - based monitoring methods have limitations in measuring the deformation of large - scale structures, such as limited observation range and susceptibility to external environmental factors, resulting in low monitoring efficiency. Therefore, this study adopts the Multi - Temporal Synthetic Aperture Radar Interferometry (MT - InSAR) technology to monitor the deformation of the SWC reservoir dam.

### Main problems
1. **Safety of long - distance water transfer projects**: Long - distance water transfer projects involve multiple interconnected hydraulic structures, and a malfunction in any link may lead to the interruption of the entire water supply network. Therefore, it is crucial to ensure the safe operation of these projects.
2. **Limitations of traditional monitoring methods**: Traditional ground - based monitoring methods (such as leveling, total station and GNSS measurements) have high precision, but their observation range is limited and they are easily affected by external environmental factors, which are not suitable for large - scale and simultaneous observation requirements.
3. **Deformation monitoring of SWC reservoir dam**: The SWC reservoir is a typical plain reservoir, and its dam is 9.6 kilometers long. It is difficult for traditional monitoring methods to establish sufficient observation sections on such a long dam, so a solution that can provide continuous spatial deformation data is required.

### Solutions
The paper utilizes the data of Sentinel - 1 satellite in C - band and TerraSAR - X satellite in X - band, and conducts deformation monitoring on the SWC reservoir dam for up to 7 years through multi - temporal InSAR technology. The main steps include:
1. **Data pre - processing**: Select the reference image, perform image registration and resampling, and generate the interferogram set.
2. **Time - series InSAR analysis**: Use the StaMPS/MTI framework for time - series analysis, and eliminate topographic errors through methods such as coherent pixel selection, phase unwrapping, error detection and least - squares method.
3. **Two - dimensional deformation decomposition**: Analyze the imaging geometric relationship and decompose the deformation along the satellite line - of - sight direction into horizontal and vertical displacements.

### Key findings
- **Overall settlement of the dam**: The entire dam has experienced continuous settlement, and the maximum deformation amount is approximately 160 millimeters.
- **Small differential settlement**: There are small differential settlements in different parts of the dam, but due to the long length of the dam, the settlement gradient is not significant.
- **Consistency of InSAR results**: The InSAR deformation results obtained from different geometric angles show good consistency, especially the correlation between the Sentinel - 1 ascending and descending orbit data sets exceeds 0.9.
- **Verification accuracy**: Compared with GNSS observation results, the accuracy of InSAR displacement is approximately 8 millimeters.
- **Main controlling factors**: The water level change has a certain influence on the deformation, but the consolidation settlement is the main controlling factor during the monitoring period.

Through these studies, the paper demonstrates the application potential of InSAR technology in long - distance water transfer projects, especially its advantage in providing spatially continuous deformation data.