Abstract:Sodium periodate is employed to enhance the crystallinity and increase the Ni3+/Ni2+ ratio of sputtered NiOx thin films. This treatment improves SAM's anchoring capability on NiOx, optimizes hole extraction at the interface, and minimizes phase separation in perovskite films. As a result, the study successfully fabricates perovskite/silicon tandem solar cells with an impressive power conversion efficiency of up to 30.48%. Sputtering nickel oxide (NiOx) is a production‐line‐compatible route for depositing hole transport layers (HTL) in perovskite/silicon tandem solar cells. However, this technique often results in films with low crystallinity and structural flaws, which can impair electronic conductivity. Additionally, the complex surface chemistry and inadequate Ni3+/Ni2+ ratio impede the effective binding of self‐assembled monolayers (SAMs), affecting hole extraction at the perovskite/HTL interface. Herein, these issues are addressed using a recrystallization strategy by treating sputtered NiOx thin films with sodium periodate (NaIO4), an industrially available oxidant. This treatment improved crystallinity and increased the Ni3+/Ni2+ ratio, resulting in a higher content of nickel oxyhydroxide. These enhancements strengthened the SAM's anchoring capability on NiOx and improved the hole extraction at the perovskite/HTL interface. Moreover, the NaIO4 treatment facilitated Na+ diffusion within the perovskite layer and minimized phase separation, thus improving device stability. As a result, single‐junction perovskite solar cells with a 1.68 eV bandgap achieve a power conversion efficiency (PCE) of 23.22% for an area of 0.12 cm2. Perovskite/silicon tandem cells with an area of 1 cm2 reached a PCE of 30.48%. Encapsulated tandem devices retained 95% of their initial PCE after 300 h of maximum power point tracking under 1‐sun illumination at 25 °C.

Study on Improving Efficiency of Perovskite Solar Cells Through Controlling Humidity Conditions and Nickel Oxide Composition

Unraveling the Modification Effect at NiOx/perovskite interfaces for Efficient and Stable Inverted Perovskite Solar Cells

Efficient Inverted Perovskite Solar Cells With Low-Temperature Processed NiOx/SAM Hole Transport Layer

Evaporated Nickel Oxide Films with Slow Annealing and Interface Modification for Perovskite Solar Cells

Tuning Surface Oxidation States of Nickel Oxide for Efficient Inverted Perovskite Solar Cells

Recrystallizing Sputtered NiOx for Improved Hole Extraction in Perovskite/Silicon Tandem Solar Cells

Impact of nickel oxide/perovskite interfacial contact on the crystallization and photovoltaic performance of perovskite solar cells

In Situ Atmospheric Deposition of Ultrasmooth Nickel Oxide for Efficient Perovskite Solar Cells

Redox-Sensitive NiOx Stabilizing Perovskite Films for High-Performance Photovoltaics

Quenching Detrimental Reactions and Boosting Hole Extraction via Multifunctional NiOx /Perovskite Interface Passivation for Efficient and Stable Inverted Solar Cells

NiOx thickness dependent improvement of NiOx/Perovskite interface for inverted planar perovskite solar cells

Syntheses of efficient nickel oxide film by low-temperature fabrication technique for high-performance perovskite solar cells

Overcoming Ni 3+ ‐Induced Non‐Radiative Recombination at Perovskite‐Nickel Oxide Interfaces to Boost Voltages in Perovskite Solar Cells

Suppressing Oxidation at Perovskite‐NiOx Interface for Efficient and Stable Tin Perovskite Solar Cells

Construction of Charge Transport Channels at the NiOx/Perovskite Interface through Moderate Dipoles toward Highly Efficient Inverted Solar Cells

Overcome Low Intrinsic Conductivity of NiOx through Triazinyl Modification for Highly Efficient and Stable Inverted Perovskite Solar Cells

High Efficiency Inverted Planar Perovskite Solar Cells with Solution-Processed NiOx Hole Contact.

Modulation on electrostatic potential to build a firm bridge at NiO x /perovskite interface for efficient and stable perovskite solar cells

Vacancy defect modulation in hot-casted NiO film for efficient inverted planar perovskite solar cells

Enhancing Conductivity of Nickel Oxide to Achieve Scalable Preparation for High-Efficiency Perovskite Solar Modules

Cation-size mismatch and interface stabilization for efficient NiOx-based inverted perovskite solar cells with 21.9% efficiency