Abstract:This study was conducted to address the critical issue of the poor safety management system in laboratories, through the design of a smart laboratory management facility based on the Internet of Things (IoT). In this design, three major safety parameters-fire, temperature and carbon (ii) oxide (CO) levels were monitored by appropriate sensors, which transmit data to the microcontroller (Arduino) for interpretation. The Arduino microprocessor processed the data received from the sensor(s), makes decisions based on the predefined algorithms. Based on the decisions made by the Arduino, the microprocessor sends instructions to a relay module triggered the necessary actions to be taken by the output hardware devices-fire extinguisher, air conditioning system and exhaust fan unit. The temperature monitoring system was designed at an operational range of 18°C to 25°C, the CO control unit was designed to maintain the CO concentration inside the laboratory at a level not exceeding 4 parts per million (ppm), as approved by the World Health Organization; while fire control unit was designed to detect the presence of smoke of naked fire inside the building. In the event that any of these parameters breach safety thresholds, the smart structure's safety system will trigger the appropriate responses. The designed structure was built in compliance with international safety standards. Results obtained through the testing and evaluation of the system revealed that the smart system had overall performance efficiency of 91% and false output of 9%. The system's failure rate of 9% can be reduced by employing advanced sensors and adjusting the delay rate. The findings of this study revealed that IoT and automation can successfully monitor and protect the working environment inside laboratories.

Design of Laboratory Fire Safety Monitoring System

Design and construction of computer laboratory security monitoring system based on STM32 microcontroller

Research and design of Laboratory environmental monitoring system based on stm32

Exploration and practice of laboratory safety access system

A new type of laboratory security monitoring system

Design and Development of IoT based Smart System for Monitoring Laboratory Environment

Design of a Multi-Channel Gas Sensor Detection System Based on STM32 Microcontroller and LabVIEW

Design of Indoor Intelligent Alarm System Based on STM32

Design of Smart Home Environment Monitoring System Based on STM32

Intelligent electrical fire warning system design

Study on College Apartment Fire Monitoring System Based on GSM

Design and Implementation of Fire Prevention and Anti-Theft Alarm System Based on Single-Chip Microcomputer

Research and Design of Remote Control System of Fire Alarm Controller Based on STM32

Fire Environment Monitoring Device for Firefighters Based on MSP430F169

Design of multi-component gas measurement system based on STM32

Design of intelligent home environment monitoring system

A Methodology for Dynamic Assessment of Laboratory Safety by SEM-SD

Design of anti-theft alarm and fire detection system based on IoT cloud platform

A New Type of Intelligent Laboratory Management and Control System Design

Design and Implementation of Alarm and control Intelligent system for electric fire prevention