Abstract:This work describes a novel finite strain hypo-elastic formulation for amorphous thermoset polymers working in the glassy regime. The constitutive formulation is able to describe time and pressure-dependent behaviour under loading rates ranging from quasi-static to impact-type loading conditions and to account for thermo-mechanical coupling effects. A non-linear pressure dependent potential function is introduced to capture the non-associative visco-plastic potential flow for volumetric plastic strain control. The formulation also incorporates an internal state or deformation resistance variable to enable the description of the polymer hardening - softening behaviour, as well as a novel relation for the dissipative fraction of the plastic work in terms of the equivalent accumulated plastic strain. The constitutive model is formulated within a finite strain kinematics framework, and full details of its numerical implementation into the finite element method using a fully implicit Euler Backward algorithm are given. Model calibration is carried out for three different thermosetting resins (PR520 and RTM6 Epoxies, and MMA adhesives).To illustrate the model capabilities, two case studies are investigated: (i) the de-formation behaviour of epoxy under moderate and impact-type loading conditions under isothermal and fully adiabatic conditions, and (ii) the fracture behaviour of adhesive layers used to bond stiff metallic substrates. Results on RTM6 epoxy show that at, e.g., 60% true strain, 48.5% of the rate of plastic work is dissipative, and that the corresponding predicted increase in temperature due to the locally dissipated heat is consistent with published calorimetry data on a similar thermoset polymer. It was also found that, by coupling the proposed constitutive model with a cohesive zone model, it was possible to predict accurately the effect of an MMA adhesive layer thickness and pressure-dependency on the growth of an interfacial crack between the MMA adhesive and the metallic substrates. The proposed model should constitute a generic phenomenological formulation for the mechanical behaviour prediction of a wide range of thermoset polymers under confined and quasi-adiabatic conditions such as in composites and adhesive joints.

Constitutive modelling of the densification process in silica glass under hydrostatic compression

A chemical dissolution technique for challenging existing constitutive models of the densification process beneath an indentation imprint in amorphous silica

Mechanical and Microstructural Response of Densified Silica Glass under Uniaxial Compression: Atomistic Simulations?

A Finite Deformation Fractional Viscoplastic Model for the Glass Transition Behavior of Amorphous Polymers

Thermomechanical Coupling in Glassy Polymers: an Effective Temperature Theory

Permanently densified SiO$_2$ glasses: a structural approach

Modelling the Mechanical Behaviours of Glassy Hydrogels

Structure and thermal conductivity of high-pressure-treated silica glass. A molecular dynamics study

Molecular dynamics simulation of shock-induced structural change and permanent densification of silica glass: The effect of initial density

Pressure-induced Amorphization of Crystalline Silica

Densification of Silica Glass at Ambient Pressure.

Structural transformations in porous glasses under mechanical loading. II. Compression

Permanent Densification of Silica Glass for Pressure Calibration Between 9 and 20 GPa at Ambient Temperature

Relaxation processes of densified silica glass

Molecular dynamics simulations of the structure and mechanical properties of silica glass using ReaxFF

Structural relaxation of porous glasses due to internal stresses and deformation under tensile loading at constant pressure

Structural Characteristics and Elasticities of Coesite and Coesite-Ii at High Pressure

Pressure-induced transformations in a glass: In situ X-Ray diffraction and Raman spectroscopy

A Finite Deformation Formulation for Amorphous Glassy Polymers under Moderate and Impact Strain Rates: Application to Adhesive Films

A thermodynamically-based constitutive theory for amorphous glassy polymers at finite deformations

Hot dense silica glass with ultrahigh elastic moduli