Abstract:Energy storage systems enable the storage of energy and provide access to carbon-neutral, environmentally friendly energy whenever or wherever it is needed. Lithium-ion batteries are currently the most preferred type among various battery technologies and are widely used in energy storage systems. Some of the features that make lithium-ion batteries advantageous include high energy density, long life, low maintenance requirements, and high operating voltage. The growing demand for energy throughout the day increases the need for batteries with high storage capacity. However, the increased capacity also leads to heating issues in lithium-ion batteries. The heating problem in lithium-ion batteries can result in nonhomogeneous temperature distribution, shortened lifespan, thermal runaway, increased internal resistance, and performance loss. Therefore, an effective thermal management system is essential for cooling lithium-ion batteries. This study aims to provide insight into the forced air cooling of prismatic 280 Ah LiFePo4 batteries, which have limited information in the literature and are more prone to overheating compared to lower-capacity batteries. In this study, five different battery pack case designs, each with different sizes and numbers of air intake holes, were determined and modelled using the SolidWorks program. Within the battery pack cases, 16 280 Ah lithium-ion batteries are placed, and an axial fan is used to cool these batteries. Initially, computational fluid dynamics analyses of the five different designs were performed in the SolidWorks Flow Simulation program. An experiment was then conducted on the design that provided the most efficient thermal management to validate the numerical results. The selected design, fulfilling the purpose of homogeneous temperature distribution and having the minimum temperature difference between batteries, was designated as Design 5. It exhibited a 62 % improvement in cooling performance with a 0.25 °C temperature difference, indicating successful temperature homogeneity between batteries. During a two-hour experiment with a 140 A discharge current, temperature measurements were taken from the surfaces of the batteries using thermocouples. Finally, the maximum error rate between experimental and numerical studies was determined to be 1.47 %, indicating successful validation of the numerical study. The air intake hole optimization, a novel design approach, prevents temperature distribution inhomogeneity caused by the distance of the batteries to the fan and offers an effective way to cool down high-capacity 280 Ah batteries.

An optimized hybrid battery pack with high energy density and high safety

An Intelligent Thermal Management System for Optimized Lithium-Ion Battery Pack

High Performance Hybrid Mg-Li Ion Batteries with Conversion Cathodes for Low Cost Energy Storage

Structural optimization of light-weight battery module based on hybrid liquid cooling with high latent heat PCM

Electrochemical performance and thermal stability analysis of LiNixCoyMnzO2 cathode based on a composite safety electrolyte

In-built ultraconformal interphases enable high-safety practical lithium batteries

Enhanced optimization algorithm for the structural design of an air‐cooled battery pack considering battery lifespan and consistency

Design of a lithium-ion battery pack for PHEV using a hybrid optimization method

An improved hybrid thermal management system for prismatic Li-ion batteries integrated with mini-channel and phase change materials

Investigating Thermal Runaway Propagation Characteristics and Configuration Optimization of the Hybrid Lithium-Ion Battery Packs

A safety design strategy for practical lithium-ion pouch cells

Optimization of the Heat Dissipation Structure for Lithium-ion Battery Packs Based on Thermodynamic Analyses

Thermal Management of Air-Cooling Lithium-Ion Battery Pack

Intelligent optimization methodology of battery pack for electric vehicles: A multidisciplinary perspective

Smart Solid‐State Interphases Enable High‐Safety and High‐Energy Practical Lithium Batteries

Multiphysics simulation optimization framework for lithium-ion battery pack design for electric vehicle applications

Rechargeable aqueous Zn-LiMn2O4 hybrid batteries with high performance and safety for energy storage

A Compact Hybrid Battery Thermal Management System for Enhanced Cooling

Optimization and experimental validation of the air intake holes of the lithium-ion battery pack

An integrated cell-to-pack design based on an origami sandwich structure to enhance cooling and mechanical performances of battery packs in electric vehicles

High‐Safety and High‐Energy‐Density Lithium Metal Batteries in a Novel Ionic‐Liquid Electrolyte