Abstract:Ultrasonic wedge bonding of aluminum (Al) wires is a widely applied interconnect technology for power elec-tronic packaging. The joint quality of the wedge bonding is mainly affected by the process parameters and material properties. Inappropriate process parameters will lead to failure modes such as chip surface pit, metal layer peeling off, wire cracking, non-sticking to the pad, etc., which limits the long-term stability of power devices. In order to reach the desired reliability, the design of experiment (DoE) is generally deployed which is costly in terms of time and related materials. Therefore, simulation-assisted analysis is in demand to rapidly narrow down the process windows. In this paper, an ultrasonic bonding model involving thick Al wires (300 mu m) was established based on the Finite Element Method (FEM), to optimize process parameters effectively with reduced time and cost. The model was designed in ANSYS utilizing the transient structural mechanics module with various stresses and ultrasonic power, to simulate the relative deformation of the bonded wires and the displacement against the substrate. The result was then verified by ultrasonic wedge bonding samples with 9 sets of process parameters. The stress distributions were simulated and analyzed with the failure modes of tensile strength tests, while the deformation of wires under various process parameters was measured and compared with shear strength tests. Further, the relationship between the failure modes of the joint and the deformation was then analyzed by Response Surface Method (RSM), and the regression equation of the wire deformation and related process parameters was established and fitted with the actual sample's data. Such analysis not only found the optimum range of the deformation of thick Al ultrasonic wire bonds but also quickly provided a range of optimized processes for Al thick wires applying ultrasonic wedge bonding techniques.

Development of a power self-regulating ultrasonic generator for wire harness welder based on load characteristics

Wireless Power Transfer with Additional Third Harmonic: Theoretical Analysis, Design, and Demonstration

Dual Resonant Frequency Inductive Power Transfer in an Underwater Tight Coupling System

Power Transfer Performance And Cutting Force Effects Of Contactless Energy Transfer System For Rotary Ultrasonic Grinding

Morphological Evolution of Single-Core Multi-Strand Wires during Ultrasonic Metal Welding

Harvesting and mapping ultrasonic vibration power using semiconducting wire-based tribovoltaic generators

Analysis of the oscillation behavior during ultrasonic welding of EN AW-1070 wire strands and EN CW004A terminals

A New Design of the High-Power Ultrasonic Generator

Design ultrasonic power generators for welding machines using piezoelectric ceramic materials for welding on non-woven fabrics

Study on mechanism of arc-excited ultrasonic

A Design of PWM Driving Circuit for Ultrasonic Motor

Welding characteristics of coated twisted wire and copper plate by ultrasonic vibration source using a transmission rod with helical slits

Design of Ultrasonic Machining Device for Thin-Wall Cylinder of Air Compressor

Development of a new type of power supply for ultrasonic motor

Ultrasonic complex vibration source equipped with a step horn with a welding tip and its welding characteristics

The development of new type intelligent high-power ultrasonic power supply

Finite element modeling and analysis of ultrasonic bonding process of thick aluminum wires for power electronic packaging

A Driving Power Supply for Piezoelectric Transducers Based on an Improved LC Matching Network

Ultrasonic Generation by Exciting Electric Arc: A Tool for Grain Refinement in Welding Process

Influence of redesigned electrode system on interfacial microstructures and thermal behaviors in resistance micro-welding of stranded conductor to interconnector

Experimental and Numerical Investigation of the Use of Ultrasonic Waves to Assist Laser Welding