Abstract:Advances in Structural Engineering, Ahead of Print. This paper presents a novel nonlinear local bond-slip model for fiber-reinforced polymer (FRP) laminates externally bonded to thermally damaged concrete substrates. The proposed model is an extension of an existing two-parameter bond-slip model and incorporates two key parameters including interfacial fracture energy ([math]) and interfacial brittleness index ([math]). To study the variations of [math] and [math] with different thermal damage levels of the concrete substrate, an extensive experimental database of shear tests on FRP-to-thermally damaged concrete bonded joints was collected from the existing literature. The [math] values were calculated from the peak pull loads with proper consideration of the bond length and width effects, while the [math] values were obtained by least-squares regression analysis using experimental load-displacement curves or measured strain distributions in the FRP laminates. The results have indicated that the [math] values initially exhibit a slight increase accompanied by mild thermal damage of the concrete substrate after exposure to moderately high temperatures; however, these values significantly decrease when the exposure temperature exceeds 300°C. The [math] values initially decrease with high-temperature exposure and stabilize at around 50% of the initial values when the temperatures reach around 400°C. Despite the inherent variability in the test database, the proposed temperature-dependent bond-slip model has demonstrated its accuracy, as demonstrated by the comparisons between the theoretical predictions generated by the model and the corresponding shear test results. This interfacial bond-slip model is expected to serve as a constitutive law to characterize the bond behavior between externally bonded FRP laminates and thermally damaged concrete substrate, thus facilitating the practical application of high-performance FRP composites in the repair and strengthening of thermally or fire-damaged RC members.

Nonlinear bond-slip model for fiber-reinforced polymer laminates externally bonded to thermally damaged concrete

Experimental Study on Dynamic Behavior of GFRP-to-concrete Interface

Bond-Slip Models for FPR-Concrete Interfaces Subjected to Moisture Conditions

Assesment of Proposed Models for Determining Allowable Frp Tensile Strain for Mitigation of Debonding Failure in Frp-Strengthened Rc Beams

Analytical Model for the Bond Stress-Slip Relationship of Deformed Bars in Normal Strength Concrete

A unified bond-slip model for the interface between FRP and steel

Development of the Nonlinear Bond Stress–Slip Model of Fiber Reinforced Plastics Sheet–Concrete Interfaces with a Simple Method

Debonding analysis of FRP-to-concrete interfaces between two adjacent cracks in plated beams under temperature variations

Bond-slip Model for FRP-to-concrete Interface

Fracturing behaviors of FRP-strengthened concrete structures

Modelling Static and Dynamic Frp-Concrete Bond Behaviour Using A Local Concrete Damage Model

Bond–slip models for FRP sheets/plates bonded to concrete

Nonlinear Fracture Analysis of Delamination Crack Jumps in Laminated Composites

An Improved Prediction for Bond Strength of Deformed Bars in Concrete Externally Confined with Fiber-Reinforced Polymer

The Bond-Slip Relationship at FRP-to-Brick Interfaces under Dynamic Loading

Bond behavior between near-surface mounted fiber reinforced polymer strips and concrete using nonlinear finite element: a parametric study

FRP-to-concrete interfaces between two adjacent cracks: Theoretical model for debonding failure

BOND-SLIP MODELS FOR FRP SHEET/PLATE-TO-CONCRETE INTERFACES

Experimental Investigation on Effective Bond Length of Flexurally Cfrp-Strengthened Rc Beams Failed by Intermediate Crack Debonding

Full-range behavior of FRP-to-concrete bonded joints subjected to combined effects of loading and temperature variation

Analytical Solution for FRP-to-concrete Bonded Joints Considering Local Unloading and Reloading