Abstract:Abstract Artificial Neural Networks (ANNs) are well-established knowledge acquisition systems with proven capacity for learning and generalisation. Therefore, ANNs are widely applied to solve engineering problems and are often used in laser-based manufacturing applications. There are different pattern recognition and control problems where ANNs can be effectively applied, and one of them is laser structuring/texturing for surface functionalisation, e.g. in generating Laser-Induced Periodic Surface Structures (LIPSS). They are a particular type of sub-micron structures that are very sensitive to changes in laser processing conditions due to processing disturbances like varying Focal Offset Distance (FOD) and/or Beam Incident Angle (BIA) during the laser processing of 3D surfaces. As a result, the functional response of LIPSS-treated surfaces might be affected, too, and typically needs to be analysed with time-consuming experimental tests. Also, there is a lack of sufficient process monitoring and quality control tools available for LIPSS-treated surfaces that could identify processing patterns and interdependences. These tools are needed to determine whether the LIPSS generation process is in control and consequently whether the surface’s functional performance is still retained. In this research, an ANN-based approach is proposed for predicting the functional response of ultrafast laser structured/textured surfaces. It was demonstrated that the processing disturbances affecting the LIPSS treatments can be classified, and then, the surface response, namely wettability, of processed surfaces can be predicted with a very high accuracy using the developed ANN tools for pre- and post-processing of LIPSS topography data, i.e. their areal surface roughness parameters. A Generative Adversarial Network (GAN) was applied as a pre-processing tool to significantly reduce the number of required experimental data. The number of areal surface roughness parameters needed to fully characterise the functional response of a surface was minimised using a combination of feature selection methods. Based on statistical analysis and evolutionary optimisation, these methods narrowed down the initial set of 21 elements to a group of 10 and 6 elements, according to redundancy and relevance criteria, respectively. The validation of ANN tools, using the salient surface parameters, yielded accuracy close to 85% when applied for identification of processing disturbances, while the wettability was predicted within an r.m.s. error of 11 degrees, equivalent to the static water contact angle (CA) measurement uncertainty.

Data-driven parameter optimization for laser-induced coloration on stainless steel

Parametric analysis and a predictive model for color difference during laser-induced coloration on titanium

Artificial intelligence-based modeling and optimization of heat-affected zone and magnetic property in pulsed laser cutting of thin nonoriented silicon steel

Model predictive control of laser metal deposition

Modeling and process parameter optimization of laser cutting based on artificial neural network and intelligent optimization algorithm

A Deep Learning Method for Material Performance Recognition in Laser Additive Manufacturing

Prediction of Femtosecond Laser Etching Parameters Based on a Backpropagation Neural Network with Grey Wolf Optimization Algorithm

Prediction and Inverse Design of Structural Colors of Nanoparticle Systems via Deep Neural Network

Offline Planning Optimization and Formation Prediction of Laser Directed Energy Deposition Process

Prediction of molten pool temperature and processing quality in laser metal deposition based on back propagation neural network algorithm

Prediction and optimization of joint quality in laser transmission welding using serial artificial neural networks and their integration with Markov decision process

Neural Network Modeling and Particle Swarm Optimization (PSO) of Process Parameters in Pulsed Laser Micromachining of Hardened AISI H13 Steel

Enhancement of laser-induced surface coloring through laser double-scan method

Predictions of in-situ melt pool geometric signatures via machine learning techniques for laser metal deposition

Modeling and Optimization of Laser Transmission Joining Process Between PET and 316L Stainless Steel Using Response Surface Methodology

Optimization of process parameters in laser cladding multi channel forming using MVBM-NSGA-II method

Selective LASER Melting Part Quality Prediction and Energy Consumption Optimization

Machine learning constructs color features to accelerate development of long-term continuous water quality monitoring

A physical simulation-machine learning model for optimal process schemes in laser-based directed energy deposition process

Artificial neural network tools for predicting the functional response of ultrafast laser textured/structured surfaces

Surface Feature Prediction for Laser Ablated 40Cr13 Stainless Steel Based on Extreme Learning Machine